Verifying Your Printer - Mitsubishi R100 User Manual

Verifying Your Printer

After setting up the printer, a printer icon will
appear in Windows' Printers and Faxes. Right
click the printer icon and choose Properties to
configure the printer.
Chapter 3 - Software Configuration
If your printer was previously set up, the R100
Wireless setup wizard changes the printing port
from the computer's local LPT1 (parallel) port or
USB port to Standard TCP/IP port*. If
necessary, you can change this back at anytime
or use Windows Add Printer to setup another
printer.
Note: If you use Windows 98 or ME which do not
support Standard TCP/IP port, you need to
use Remote Port which is supported by the
R100.
R100 Wireless Gateway 81