Mitsubishi R100 User Manual page 79

7. Select Protocol LPR and type
LPRServer in Queue Name field.
9. Press Finish to complete the Add
Standard TCP/IP Printer Port
Wizard and go back to Add Printer
Wizard.
11. Click Next to set this as your default
printer.
13. When the Add Printer Wizard is complete, click Finish to close the wizard.
Chapter 3 - Software Configuration
8. After completing the settings, press
Next.
10. Find the manufacturer and model of your
printer. Click Have Disk if you cannot
find it in the list and use the driver provided
with your printer.
12. Select Yes and Next to print a test
R100 Wireless Gateway
page, otherwise select No.
79