Status & Log - Mitsubishi R100 User Manual

Chapter 3 - Software Configuration
Status & Log
The Status & Log pages give you all the necessary information for
monitoring the R100 Wireless Gateway's condition.
72
Status
System information for WAN,
LAN, and Printer are displayed on
this page. The buttons for the
WAN interface allow you to release
or renew the IP address if your
WAN Connection Type is set as
Automatic IP. The Remove button
for Printer Server is used to remove
printing jobs manually.
Wireless
Wireless clients, who connect to
the R100 using the 802.11g
standard, are displayed on this
page. You can use the Radio
Control buttons to manually
disable or enable the wireless
function for these clients.
DHCP Leases
Clients who request an IP address
from the DHCP server of your local
area network, or DHCP server in
your wireless network behind a
Wireless Firewall are displayed on
this page.
R100 Wireless Gateway