Table of Contents
Advertisement
Viewing video images
A. Connecting the projector to video equipment
Preparations:
• Make sure that the power of the projector and that of the video equipment are turned off.
To VIDEO terminal
1
Video cable
DVI
To video output terminal
Pb
Cr/Pr
VIDEO
b/Pb)
R(Cr/Pr)
H/HV
V
S-VIDEO
RS-232C
To S-video terminal
1
S-video cable
DVI
Cb/Pb
Cr/Pr
VIDEO
To S-video output terminal
B(Cb/Pb)
R(Cr/Pr)
H/HV
V
S-VIDEO
RS-232C
2
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of No Signal
may appear on the screen when you change the channel via any channel that is not being received. In such a
case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its
channel skip function (that is a function not to display channels that are not being received) enabled
Connecting to a DVD player
To connect this projector to video equipment that has component video output terminals, such as a DVD player,
use the COMPONENT terminals.
C
(P
)
C
R
R
DVD player
Y
G
B
• Images may not be projected correctly depending on the type of the DVD player you use.
• Though it may take some time before an image is displayed on the screen depending on the type of the input
signal, such symptom is not a malfunction.
EN-14
Video player, or the like
2
Video player, or the like
Component cable (Option)
(P
)
Y
B
B
To audio output
terminal
C
(P
)
C
(P
)
B
B
R
R
BNC-RCAconnector
(Option)
R
Cable with BNC connector (Option)
Select this connection when using long cable.
1. Connect one end of a commercially available video cable
to the VIDEO terminal of the projector.
2. Connect the other end of the video cable to the video
output terminal of the video equipment.
When the video equipment is equipped with the S-
video output terminal, make the connection as
follows.
1. Connect one end of a commercially available S-video
cable to the S-VIDEO terminal of the projector.
2. Connect the other end of the S-video cable to the S-video
output terminal of the video equipment.
• Also read the instruction manual of the equipment to be
connected.
• This projector does not have any built-in speaker. To
reproduce audio, connect audio equipment.
• Contact your dealer for details of connection.
Y
Y
Cb/Pb
G(Y)
B(Cb/Pb)
Audio cable (Option)
To audio input
terminal
Y
Cb/Pb
G(Y)
B(Cb/Pb)
G(Y)
Cb/Pb
Cr/Pr
DVI
Cr/Pr
VIDEO
R(Cr/Pr)
H/HV
V
S-VIDEO
RS-232C
DVI
Cr/Pr
VIDEO
R(Cr/Pr)
H/HV
V
S-VIDEO
RS-232C
B(Cb/Pb)
R(Cr/Pr)
Advertisement
Table of Contents
