3D Video; Initial Setup; Watching 3D Video; To Watch Regular (Non-3D) Video - Mitsubishi WD-73837 Basic Owner's Manual

3D Video

This section provides Instructions for viewing 3D video
using the TV's 3D feature. The 3D options are found in
the Adjust > 3D Mode menu.

Initial Setup

1.
Check if your HDMI 3D video source device
outputs a 1080p 60 Hz signal. This information will
be needed when you assign an input name in the
New Device Found screen.
2.
If your 3D glasses came with an emitter box,
connect the emitter box to the 3D GLASSES
L
EMITTER jack on the back of the TV.
Y/ VIDEO Pb
L
AVR
AUDIO
HDMI
OUTPUT
R
1 2 3
Y/ VIDEO Pb
DIGITAL
AUDIO
OUTPUT
L
(480i / 480p / 720p / 1080i)
3.
Power on the TV and the source device.
4.
Connect the source device to the TV's HDMI input.
5.
When the New Device Found screen displays,
name the input according to the table below.
The signal type and choice of name are important
because the TV will process the video signal
differently depending on the name you assign. If
your source device is a Blu-Ray disc or a game
console, the signal must be 1080p at 60 Hz.
Source
of 3D Type of 3D Video Signal
Video
Computer Recommended: 1080p 60 Hz
(1920 X 1080). The image will fill
the TV screen.
Other 60-Hz computer video
signals compatible with the TV
will display with black bars.
Any other To see 3D video, signal must be
3D video 1080p 60 Hz
source
6.
BACK to close the New Device Found
Press
screen, or to change the name in the Input>Name
sub-menu.
RS-232C
3D
Pr
GLASSES
EMITTER
RS-232C
DVI/PC INPUT
ANT
R AUDIO L
3D
Pb Pr
GLASSES
EMITTER
Pr
Pb Pr
R AUDIO L (480i / 480p / 720p / 1080i) IR-
NetCommand
Output
IR-
NetCommand
Output

Watching 3D Video

1.
Press
2.
Highlight the icon for the 3D video input and press
ENTER.
3.
Press
menu.
4.
Set 3D Mode to On. The On setting will be memo-
rized for the current activity/input combination
when you exit this menu.
ANT
R
Use the Adjust > 3D Mode menu to enable 3D video
viewing.
5.
Press
6.
If the image does not appear correct, open the
Adjust > 3D Mode menu again and set Glasses
L-R to Reverse to reflect the correct polarity.

To Watch Regular (non-3D) Video

Assign
The 3D Mode setting is memorized for each activity/
Name
input combination. When you want to watch non-3D
video on the input selected above:
PC
• Press
which the input is selectable.
• Open the
Mode to Off.
Any
other
name
ACTIVITY.
MENU and select the Adjust > 3D Mode
BACK to close the menu.
ACTIVITY and select a different activity in
Adjust > 3D Mode menu and set 3D
19