EMG Speedy Go Instruction Manual page 19

B I KE ASSE M B LY
The bicycle will be delivered inside a box, almost completely assembled.
Be sure to adjust the saddle and handlebar according to your height. Also
be sure to carefully install the pedals in order to avoid problems while using
the bike.
It is very important for safety to tighten the threaded fasteners to the cor-
rect torque.
In case of conflict between the instructions indicated in this manual and the
information provided by a component manufacturer, please verify with a
qualified bicycle mechanic or customer service operator.
Bolts that are too tight can stretch and deform. Bolts that are too loose can
move and subject to stress. In both ways, it can lead to a sudden failure of
the bolt.
Always use a correctly calibrated torque wrench in order to tighten the cri-
tical fasteners on your bicycle.
Carefully follow the torque wrench manufacturer's instructions in order to
use it correctly and obtain accurate results.
When assembling the pedals, pay attention to the installation di-
rection:
The R (Right) pedal is mounted on the right pedal
The L (Left) pedal is mounted on the left crank arm
Pedal R is normally screwed clockwise.
Pedal L is screwed counter-clockwise.
19