Universal Audio Volt 476 Hardware Manual page 12

outputs, and also to the
audio software.
Audio software outputs 3-4
OUT 3-4 are routed to the monitor
and headphone outputs.
Audio software outputs 1-2
OUT 1-2 are routed to the monitor
and headphone outputs.
DEFAULT SETTING
From the factory, OUT 1-2 is selected. With this setting, you hear audio
from your computer (most audio software will automatically route audio to
outputs 1-2), but your inputs are not directly monitored.
Monitor Source Example
HOW TO LISTEN TO PREAMP INPUTS AND AUDIO SOFTWARE
Select IN 1-2 to hear hardware inputs 1 and 2, and select OUT 1-2 to hear
audio from your computer.
the monitor and headphone
outputs.
Audio software outputs 3-4
are not routed to monitor
and headphone outputs.
Audio software outputs 1-2
are not routed to monitor
and headphone outputs.