Osd Warning Messages - Dell G2723HN User Manual

OSD warning messages

When the monitor does not support a particular resolution mode, you can see the
following message:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. The recommended mode is 1920 x 1080.
NOTE: The message that appears on the monitor varies based on the type
of input cable used.
You can see the following message before the DDC/CI function is disabled:
When the monitor enters the Standby mode, the following message will appear:
Activate the computer and wake up the monitor to gain access to the OSD.
When you increase the Brightness level above the factory default setting for the first
time, the following message appears:
Dell 27 Gaming Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to 1920x1080, 165Hz
listed timing as per the monitor specifications.
Monitor specifications
Dell 27 Gaming Monitor
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
Dell 27 Gaming Monitor
Going into Standby mode...
or any other monitor
G2723HN
for the horizontal and vertical
No
G2723HN
G2723HN
Operating the monitor | 47