Engine Assembly - JAC HFC7151M1V-U221B Workshop Manual

III. Engine Assembly
1. Precautions on Installation and Dismantlement
Caution:
Operation in violation of the following instructions may incur personal injury!
■ Park the vehicle on flat and firm ground.
Attention:
■ Always pay attention to safe operation, and do not conduct any forcible operations or
operations other than that specified in Instructions.
■ Do not start before the exhaust system and engine coolant have completely cooled down.
■ If the necessary items or operations are not mentioned in the sections of Engine, see
relevant chapters.
■ Use the specified lifting points all the time and select appropriate lifters according
conditions.
2. Preparation for Dismounting Engine and Transmission Assembly
1) General
Dismount the engine and transmission assembly from the vehicle, and then detach the engine from
transmission.
2) Preparation
① Discharge the engine coolant from the radiator. See "Change Engine Coolant".
② Discharge the engine oil, transmission oil and clutch oil. See "Engine Oil", "Transmission Oil" and
"Clutch Pipeline".
③ Collect the refrigerant in AC pipeline.
④ Discharge power steering fluid.
Attention:
■ Perform this step after the engine has cooled down.
■ Do not spill engine cooling fluid or brake fluid to the drive belt.
⑤ Dismount the following parts:
■ Engine trimming cover. See "Intake Manifold".
■ Front wheels and tyres. See "Wheels and Tyres".
■ Engine deflectors (left and right).
■ Air duct and air filter assembly. See "Air Duct".
■ Battery, battery base and base support. See "Battery".
■ Radiator assembly and radiator fan. See "Radiator".
江淮汽车 部门：客户服务部
Mechanical Part of
Engine