Page 1
Foreword Acknowledgments Thanks for your trust in us and our products. Welcome to the growing team of vehicle owners. We provide you this vehicle with full confidence. With advanced technology, excellent process, outstanding performance, and strict quality control, this vehicle integrates good power performance, cost efficiency, comfort and safety, and various convenient and entertainment features for your service.
Safety Precautions To ensure the safety of the driver and passengers, please observe the following important driving rules: ● Never drive after drinking or taking medicine. ● Be sure to observe the speed limit sign, and do not overspeed or overload. ●...
Page 3
The copyright of this Manual belongs to the Company. It is strictly prohibited to copy all or any part of this Manual without the consent of the Company. The Company is responsible for modifying and interpreting this Manual. Precautions on Oil The Company will not provide quality warranty for damage to the engine, transmission or other drive systems caused by the use of unacceptable fuel and lubricating oil even within the warranty period.
To Be Read for Driving Safety Notice Danger ● The text with this symbol indicates ● The text with this symbol is related the possible cause of vehicle damage. to driving safety. Failure to observe Be sure to strictly follow the relevant relevant warnings may easily cause notices when driving this vehicle.
Page 6
Panoramic parking view system ........135 Check of tires ..............91 Reversing radar system ..........137 Hood ................. 92 Filler cap ................93 Reversing visual system ..........141 AdBlue filler ..............95 Cruise control system ............. 142 Adjustment of steering wheel ........... 97 Emission control system ..........
Page 7
Interior cleaning ............. 207 5 A/C and infotainment system ........173 A/C system ..............174 Anti-rusting treatment ............ 209 Infotainment system ............183 8 Maintenance and do-it-yourself ........211 Maintenance requirements ..........212 6 Emergency ..............185 Hazard warning device ........... 186 Inspecting the engine compartment .......
Safety Safety Seat belt .................. 2 Airbag system ..............18 Prompts for use of seat belt ..........2 Airbag warning light ............20 Correct wearing of seat belt ..........3 Front airbag ..............21 Checking of seat belt ............6 Front passenger airbag assembly ........
Safety Seat belt If you maintain correct sitting posture Prompts for use of seat belt and fasten the seat belt correctly, you will Why seat belt can protect driver decelerate with the vehicle, as shown in and passengers Fig. ③ . In this way, the probability of death and the severity of injury will be When you are sitting in or on a certain object, you moves at the same speed as the...
Safety Warning Warning ● The damaged seat belts not only ● Never try to repair, refit or remove the seat belt of the vehicle by fail to provide protection, but also may affect their protection function, yourself. the seat belt and all parts which may lead to casualties in the and components must be repaired in the after-sales service shop.
Page 13
Safety Warning Warning Warning ● Improper wearing of seat belts or belt as much as possible on the buckle of other passengers' seats, failure to wear seat belts will increase premise of not affecting the ride protection function of seat belt will the risk of accident casualties.
Safety Checking of seat belt Three-point seat belt Warning Fastening of seat belt Do not use twisted seat belts. ● Never excessively incline the Keep the seat belt clean and check the backrest for comfort. Seat belts work conditions of all seat belts regularly. If it is best when passengers sit upright on difficult to pull the seat belt out of the seat the seat against the backrest.
Safety Height adjustment of seat belt Unfastening of seat belt Warning ● The height of the shoulder belt anchor shall be adjusted to the most suitable position. Otherwise, the performance of entire seat belt will be reduced, and the risk and severity of injury in case of an accident will be increased.
Safety Check the working condition of Seat belt maintenance Seat belt pretensioner system seat belt Check all components of the seat belt (such as buckle, latch, retractor, webbing and When the seat belt is pulled out quickly anchor) for normal function on a regular from the retractor or the vehicle decelerates basis.
Safety Child safety Child passenger Warning Warning Do not leave children in the vehicle ● The pretensioner in seat belt device. This will not lead to a fire or alone pretensioner system cannot be used cause harm to the human body. again after starting, and shall be ●...
Safety Protection of children Children are forbidden to put their Adults need to open and close windows heads and hands out of the window and doors for children Children need to receive proper protection when riding in a vehicle. Please comply with local national standards and regulations, and choose appropriate child restraint systems based on their body sizes.
Safety Child restraint system Infants Protection of children with large body size Please select the child restraint system AIRBAG suitable for your vehicle and children, and If a child's body exceeds the recommended install and use the system according to the size of the child restraint system, he/she manufacturer's instructions.
Page 20
Safety Warning Warning Notice ● Infants shall always be placed in the in your vehicle. ● After installing a child restraint child restraint system when riding in ● The child restraint system shall be system, test it before placing the child in it.
Page 21
Safety Child seat suitability Child restraint system fixture Information on the suitability of different placing to child restraint systems(CRS): There are two ways to fix the child restraint system fixture to the vehicle: ISOFIX and three-point seat belt. (Right rudder) Seat Instructions for using child seats position...
Page 22
Safety Symbol Description Suitable for all mass and size groups of universal category CRS fixed with vehicle seat belt. Not suitable for CRS installation. Suitable for i-Size and ISOFIX CRS. Seat equipped with a top tether anchorage. When the passenger side front airbag is activated by Airbag Switch, the use of a rear facing CRS system is prohibited, and a forward facing system can be used;...
Page 23
Safety F3: Full-height forward-facing toddler Placing position(Five seats) Front seat passenger side F2: Reduced-height forward-facing toddler Second Seating position Second row The front passenger Front passenger row in the window side airbag has been middle airbag activated F2X: Reduced-height forward-facing deactivated toddler CRS R3: Full-size rearward-facing toddler CRS...
Page 24
Safety 3.When your child seat has an upper pull Installation of child seat using child Notice strap, there are corresponding upper pull seat anchorage strap fixing points on the rear seats of ● For a rear-facing child seat, adjust ISOFIX is a standard protection system the vehicle.
Page 25
Safety 4.The hook of the upper strap passes from Installation of child seat with seat 5. Tighten the top tether, and gently the outside to the inside of the second shake the child seat to make sure it belt row seats through the hole of the upper has been properly secured.
Safety Airbag system The airbag system is designed to assist rather than replace the protection function of the seat belt, so the seat belt always is properly fastened. The airbag helps reduce the severity of injury. However, the deployment of airbag may cause abrasion or other injuries.
Page 27
Safety AIRBAG Warning Warning seat belt correctly can the airbag soon as possible with new parts system give full play to its protective approved by the Company that are suitable fort for the vehicle. role, so as to reduce the severity of accident casualties.
Safety Airbag warning light ● The airbag warning light stays on. Warning ● The airbag warning light flashes may cause breathing difficulties, intermittently. especially for patients with asthma ● The airbag warning light is always off. or other health problems. In this case, such personnel shall get off the Warning car as soon as possible, or open the...
Safety Front airbag The driver's front airbag is located in Front passenger airbag the middle of the steering wheel. The assembly passenger's front airbag is located on The front passenger airbag can be turned the instrument panel. All marked with on and off in the vehicle MP5.
Safety Side airbag Activate the front passenger airbag Front passenger airbag indicator The front passenger airbag indicator 00:26 indicates the functional status of the front Vehicle Body Assistance Instri Sound and Light Driving passenger airbag. Steering Handiness Standard PASSENGER AIRBAG OFF Display Function Standard...
Safety Curtain airbag Caution Caution ● The system may not trigger the (2)Slight side collision. curtain airbag in the following (3)Rollover. situations: (4)Rear collision. (1)Frontal collision. (2)Slight side collision. Warning (3)Rollover. (4)Rear collision. ● Do not place any object over the side airbag module.
Safety How airbag system works Front center airbag Warning The airbag is disposable. If the airbag clothes and hats hook in the vehicle warning light is not damaged, the airbag can only be used to hang lightweight warning light will be illuminated after the clothes.
Page 33
Safety When the airbag system is working, there 2.The vehicle hit low and short objects like Circumstances where frontal airbag may be a burst sound, and smoke-like steps violently when it is running. may be triggered objects can be seen, which are normal 1.The vehicle head hits a cement wall that phenomena.
Page 34
Safety 4.After the vehicle climbed over the steps Circumstances where frontal airbag 3.Vehicles falling into or crossing deep and shoulders, it fell onto the road may not be triggered ditches. surface. 1.The vehicle experiences a slight collision, and the object in the collision also undergoes deformation or movement.
Page 35
Safety 2.The vehicle hits the rear of a truck. 3.The vehicle runs into objects which are 4.The vehicle experiences a small overlap easy to be deformed, like trees. or oblique collision.
Safety MCB (Multi Collision Brake) 5.Tilting, side impact, rear impact, minor 6.The vehicle is rear-ended. frontal impact, malfunction of the airbag When a collision occurs, after the ACU system, and the like. confirms that the airbag point explosion condition is reached, the MCB can automatically implement the braking action to reduce the risk of continuous collision during the accident.
Safety Vehicle identification Vehicle identification number Vehicle nameplate (VIN) Vehicle identification number, abbreviated as VIN, is a unique set of seventeen letters or numbers used on a vehicle to identify the manufacturer, powertrain, chassis serial number, and other performance information. Method to obtain VIN There are multiple VIN on the vehicle, among which the following 2 locations are...
Safety Engine nameplate 3.On the rear frame of the right front wheel of the vehicle. The engine nameplate is located on the front side of the engine hood. ...
Instruments and control Instruments and control Instrument cluster ............... 33 Front seat adjustment ............50 Rear seat adjustment ............53 Instrument and gauge ............34 Speedometer ..............34 Seat heating ..............53 Engine tachometer ............34 Seat armrest ..............54 Engine water thermometer ..........
Page 40
Instruments and control Front fog lamp ..............61 Storage space ..............68 Rear fog lamp ..............62 Rear seat bag ..............68 Reversing lamp ..............62 Glove box ................. 69 License plate lamp ............62 Center console armrest box ..........69 Daytime running lamp ............
Instruments and control Instrument cluster Danger ● Do not touch or clean the instrument when it is working, which may cause damage to the instrument and even 12:20 lead to traffic accidents due to the driver's distraction. 1000rpm km/h Warning ●...
Instruments and control Instrument and gauge Speedometer Engine tachometer Engine water thermometer 12:20 km/h 1000rpm The speedometer shows the current speed The engine tachometer shows the engine When the ignition switch is in the "ON" of the vehicle, in km/h. speed per minute, in 1000 rpm.
Instruments and control Fuel gauge temperature is too high and driving must the vehicle as soon as possible. When the be stopped as soon as possible. Under fuel warning light is on or the fuel level is normal driving conditions, the engine water lower than "E", driving the vehicle may thermometer lights up around the 4th grid.
Instruments and control Indicator and warning light Self-inspection of warning light and indicator Close all doors, press the parking brake pedal, and fasten the seat belt. When the ignition switch is in the "ON" position, the following warning lights or indicators (if equipped) will light up until the engine starts: Symbol Description...
Page 45
Instruments and control Engine anti-theft indicator (yellow) Engine water temperature warning light (red) Airbag warning light (red) Electric power steering system fault warning light (red) Anti-lock braking system (ABS) fault warning light (yellow) Fuel warning light (yellow) Electronic stability program (ESP) indicator (yellow) TPMS Tire pressure monitor system (TPMS) fault warning light (yellow) Tire pressure abnormal warning light (yellow)
Instruments and control Warning light Symbol Description Color Symbol Description Color Battery fault warning light Fuel warning light Yellow Anti-lock braking system (ABS) fault Yellow Transmission fault warning light Yellow warning light Brake system fault warning light Tire pressure abnormal warning light Yellow Tire pressure monitoring system TPMS Engine oil pressure warning light...
Page 47
Instruments and control 1. Battery fault warning light (red) If this warning light continues to light up, immediately, stop the engine, and then or lights up during driving, or does not restart the vehicle once or twice. If this When the ignition switch light up when the ignition switch is in the warning light continues to light up, do is in the "ON"...
Page 48
Instruments and control If the warning light continues to light up 6. Engine fault warning light 5. Electric power steering system after the engine is started, or lights up (yellow) fault warning light (red) during driving, or does not light up when When the ignition switch When the ignition switch the ignition switch is in the "ON"...
Page 49
Instruments and control "ON" position, it indicates a malfunction 9. Engine water temperature Warning in the EPB system. At this point, contact warning light (red) an after-sales service store as soon as ● Do not touch the radiator fan even When the ignition switch possible for maintenance.
Page 50
Instruments and control 12. Tire pressure abnormal warning 13. Tire pressure monitor system Warning light (yellow) (TPMS) fault warning light ● When the fuel warning light is on (yellow) When the ignition switch or the fuel level is lower than "E", is in the "ON"...
Page 51
Instruments and control 14. Overspeed warning light (red) If this warning light continues to light up, If this indicator lights up when driving or lights up during driving, or does not or goes out when the ignition switch is in When the vehicle's driving light up when the ignition switch is in the the "ON"...
Instruments and control Indicator Symbol Description Color Symbol Description Color Electronic stability controller off (ESC High beam indicator Blue Yellow OFF) indicator Low beam indicator Green Engine anti-theft indicator Yellow Front fog lamp indicator Green AUTO HOLD working indicator Green White/ Rear fog lamp Indicator Yellow...
Page 53
Instruments and control 1. High beam indicator (blue) 6. Turn signal lamp/hazard warning 7. Electronic Parking Brake (EPB) indicator (green) working indicator (red) This indicator will light up when the high beam When the turn signal When the ignition is in the is turned on or when a is turned on, the left or "ON"...
Page 54
Instruments and control 9. Electronic stability controller 11. Engine anti-theft indicator 13. Cruise indicator (white/green) (ESC) indicator (yellow) (yellow) When the ignition switch is in the "ON" position and When the ignition switch When the ignition switch the cruise control switch is in the "ON"...
Instruments and control Multi-function display screen 16. 2WD indicator (green) The multi-function display screen is integrated into the instrument panel, When the vehicle is in 2WD displaying various driving related mode, this indicator will information for the driver, such as the light on.
Instruments and control Driving data Display Content Description The driving data includes mileage, fuel Speed It shows the current engine speed of the vehicle. consumption, and tire pressure. You can switch the display content through the It shows the current fuel level of the fuel tank and the number of miles button on the right side of the steering you can drive further;...
Page 57
Instruments and control The following table describes other displayed information: Display Content Description Total mileage ODO shows the total traveled mileage of the vehicle. (ODO) The range of the Odometer is (0~999,999) km. When it exceeds the maximum value, it will be displayed as "Err". It shows the vehicle's cruise speed set by the current driver;...
Instruments and control Seat Driver Seat Front seat adjustment Warning If your vehicle is equipped with electric ● The distance between the driver and Danger seats, you can adjust the seats in multiple the steering wheel must not be less directions through the seat adjustment than 25 cm, and the distance between ●...
Page 59
Instruments and control ① Seat forward and backward ② Seat height adjustment ③ Backrest angle adjustment adjustment Lift the rear end of the handle to slowly Move the handle forward to fold the seat Push the handle forward. The seat slowly arise the seat;...
Page 60
Instruments and control Front passenger seat ③ ② ③ Backrest angle adjustment ① ② Seat height adjustment Move your body tightly against the To ascend the seat, repeatedly pull up the backrest, pull up the inclination adjustment ① Seat forward and backward seat height adjustment handle.
Instruments and control Rear seat adjustment Seat heating Warning ● After each overturn, please confirm whether the backrest is locked in place. An unlocked backrest cannot provide effective protection in ℃ collision accidents and emergency braking. ● Do not adjust the sear while driving. When your vehicle is equipped with seat Seat cushion overturn heating function and the ignition switch is...
Instruments and control Seat armrest Warning Warning Front row ● If the seat heater is used for ● Do not use fuel, diluents, or similar passengers who are not sensitive to items to clean the seats. pain or temperature due to drugs, leg disability or chronic diseases (such Notice as diabetes), their back, hips and...
Instruments and control Headrest Optimal headrest position Rear Row Adjustable headrest If your vehicle is equipped with adjustable headrests. There are multiple notches on the headrest lever to lock it in the desired position. Warning ● The headrest of the middle rear seat cannot be locked when it is at its lowest position, and it needs to be raised by one gear when in use.
Instruments and control Light adjustment space is small, and the headrest may not Always select the use position when riding The adjustment switch for the exterior in the vehicle. be able to be removed. At this time, you headlights is located on the lower side of can unlock the backrest and rotate the When selecting the use position, move the the dashboard near the driver's door.
Instruments and control Wiper and washer switch load and driving conditions to improve Warning Notice visibility without dazzling oncoming vehicles. ● When the temperature drops near the ● Do not use the wiper when the glass freezing point, and no appropriate is dry.
Instruments and control "HI" position, the wiper will continuously Front windshield wiper and Wiper operation wipe at high speed. washer switches MIST: When the wiper control lever is Washer operation pushed up from the "OFF" position to the "MIST" position and released, the wiper Gently pull the wiper control lever control lever automatically returns to the backwards (towards the driver).
Instruments and control Exterior illumination lamp Exterior light adjustment switch ① Front Turn signal lamp ⑤ Rear turn lamp ② Daytime running lamp / Position lamp / ⑥ Brake lamp / Position lamp 1. Light control lever FrontTurn signal lamp ⑦...
Instruments and control Automatic headlamp Position lamp Notice The position lamp is used in an The automatic headlamp function is to ● There is a delay in starting the environment with poor visibility, so that automatically control the turning on and automatic headlamp.
Instruments and control Low beam High beam Notice The low beam is mainly used in dark or The high beam helps you know the long- ● No matter where the light control poor visibility environment to ensure your distance road conditions when driving at lever is, the headlamp can flash.
Instruments and control Rear fog lamp License plate lamp Turn signal lamp The rear fog lamps are mainly used in When the position lamp or headlamp When a vehicle needs to turn or change situations of poor visibility (such as rainy is turned on, the license plate lamp will lanes, turn on the turn signal lamp in and foggy weather) to remind vehicles and...
Instruments and control Interior lamp Hazard warning indicator on. At the same time, the left and right turn Door lamp signal lamps on the dashboard also flash. You can turn on the hazard warning lamp under the following circumstances: 1.You have an emergency. 2.Vehicle is in an unsafe state due to a malfunction.
Instruments and control Steering wheel accessory Compartment illuminating switch operation Illuminating lamp lamp Horn Press the switch ③ to turn on the front illuminating lamp, and press it again to turn off the lamp. Door control lamp switch Press switch ④ to turn on the door control function.
Instruments and control Steering wheel button (left) Steering wheel button (right) Notice ● Check the working condition of the horn regularly to ensure that it can be used normally. ● Do not thump or press the horn switch with a sharp object. ①...
Instruments and control Sun visor Power supply Power socket When the ignition switch is in the "ACC" or "ON" position, the power socket can provide power, which can be used to charge mobile phones, and power the driving recorder. Front power socket To block the light from the side, pull the To block the light from the front, turn sun visor out of the side bracket and turn it...
Instruments and control Wireless charging Rear power socket Notice ● When using the power socket, first unfold the protective cover. After use, promptly unplug the accessory power plug and fold the socket protection cover. ● Avoid using power sockets for a long time when the power system is deactivated to prevent the 12V battery from being used up.
Instruments and control Storage space Rear seat bag Notice Notice ● Only one phone can be charged at a as a storage box, turn off the wireless charging function. time. ● Intermittent stopping and resuming wireless charging may occur on Warning bumpy roads.
Instruments and control Glove box Glasses case Center console armrest box Pull up the armrest to open the armrest The glasses case is located on the ceiling Pull up the handle as shown in the figure console. Press the projection part on the to open the glove box.
Instruments and control Cup holder The cup holder is used to place a cup, move Warning an ashtray or beverage. Only closed cups ● Do not place objects other than can be placed in the cup holder; otherwise, glasses in the glasses case. beverage may splash out and cause damage Otherwise, these objects will be to vehicle electronic equipment.
Instruments and control Windows Window control switch switch. Press this switch again to restore When the ignition switch is in the "ON" position, the window can be raised and normal operation of window. Notice 4. Front passenger side window switch lowered through the window control switch.
Instruments and control Automatic raising/lowering indicates that the self-learning of driver Warning side window function is activated If your vehicle is equipped with the successfully. ● Never activate the anti-pinching automatic raising/lowering function of 5.If the switch is released during window function intentionally by pinching four windows, it is not necessary to keep movement, restart the above operation.
Instruments and control Sunroof Sliding of sunroof When the START switch is at "ON" Notice position, open or close the sunroof through the sunroof control switch right ahead. ● When parking for a long time, please close the sunroof to prevent Danger water from entering the vehicle or being stolen, causing unnecessary...
Instruments and control Tilting of sunroof Anti-pinching function of Notice sunroof ● When the sunroof is opened, the The sunroof has anti-pinching function visor will be opened at the same during sliding and tilting. When the time; when the sunroof is closed, the sunroof hits an obstacle during closing, visor needs to be closed manually.
Instruments and control Sunroof visor Press and hold the visor switch, and the visor will automatically start to move until ① Visor opening switch it is fully opened or closed. If any switch ② Visor closing switch is pressed during this period, the visor will Briefly press the visor switch, and the stop moving.
Inspection and adjustment before driving Inspection and adjustment before driving Locking and unlocking with central door lock switch ..88 Key ..................79 Unlocking and locking with the interior door handle ..88 Key information ............... 80 Locking without key ............89 Smart key system ..............
Page 86
Inspection and adjustment before driving Closing of hood ..............92 Filler cap ................93 Opening of filler cap ............93 Closing of filler cap ............94 AdBlue filler ................. 95 Adjustment of steering wheel ..........97 Adjustment of steering wheel angle ......... 97 Unlocking of steering wheel ..........
Inspection and adjustment before driving Only the special key of your vehicle can Warning Warning start your vehicle. The key number plate is provided with the key. Please record as power windows and doors. installing additional RF power the key number and keep it in a safe place ●...
Inspection and adjustment before driving Key information within the effective range, and then all Notice doors will be locked at the same time. The The vehicle is equipped with two smart keys. turn signal will flash once and the horn ●...
Inspection and adjustment before driving Smart key system The smart key system has all the functions Notice Notice of ordinary remote keys, and can also ● When the driver's door is not closed, function of the key. realize remote control of door windows, the vehicle will not be locked.
Inspection and adjustment before driving Locking and unlocking and switch the ignition switch mode by Warning operating the ignition switch. ● If a large amount of water splashes Notice on the door handle and the key is within the effective operating range ●...
Inspection and adjustment before driving Remote control of window vehicle will be unlocked. At this time, the Notice turn signal will flash twice to indicate that ● Even if the smart key is within the the vehicle is unlocked. All doors are closed. Press and hold the effective operating range, the smart LOCK button on the key within the...
Inspection and adjustment before driving Replacement of key battery Notice Danger ● Do not touch the internal circuits and electronic terminals of the key; ● The integrated key fob contains a otherwise, it may cause a fault. coin cell battery. Do not ingest the ●...
Inspection and adjustment before driving Emergency starting 3. Remove the circuit board. 5. Install it in an order reverse to its removal. When the battery is low and the vehicle cannot be started, place the key in the Warning standby antenna position to start the vehicle ●...
Inspection and adjustment before driving Anti-theft system Engine anti-theft system Warning Notice In order to prevent the vehicle from ● Do not attempt to modify the vehicle ● When the door is opened in any other being stolen, there is a signal transmitter anti-theft system or add other way, an alarm will be activated.
Inspection and adjustment before driving Door Locking and unlocking with Alarm releasing conditions Warning mechanical key When the alarm is triggered unexpectedly, ● Before opening any door, be sure The mechanical key combination is it can be released by using the mechanical to pay attention to any approaching installed on the smart key and is taken out key, remote control function of key or...
Inspection and adjustment before driving Locking and unlocking with Notice central door lock switch ● When this button is pressed, there Operate the central door lock switch on the will be an obvious sound for Locking driver's door to lock and unlock all doors. reminding.
Inspection and adjustment before driving Speed sensing of door lock door from inside and causing unnecessary Notice injury. It is recommended to start the child Automatic locking safety lock when there is a child in the rear ● When the doors are locked in this seat.
Inspection and adjustment before driving Tailgate Check of lamps and alarm indicators Release of child safety lock Open the door from outside and turn the In order to ensure the safety of the vehicle child safety lock to the reverse position and passengers, please carefully check whether all lamps, turn signals, alarm indicators and indicators work normally...
Inspection and adjustment before driving Check of tires Tires and rims are important components Notice Warning in running and braking of vehicle. Its service life depends on factors such as ● Regularly check the tire pressure, ● When the wear of tire exceeds running road conditions, vehicle load, tire especially before long-distance a certain degree, the adhesion...
Inspection and adjustment before driving Hood Opening of hood Closing of hood 1. Pull up the hood lock opening handle at 1. When closing the hood, press the front the lower left of the driver's dashboard, edge of the hood with hand and slowly and the hood will pop up slightly.
Inspection and adjustment before driving Filler cap 2. Unscrew the fuel tank cap Opening of filler cap Warning counterclockwise and place it on the 1. The filler cap plate is located at the rear ● When adding fuel, do not smoke or bracket inside the filler cap.
Inspection and adjustment before driving Closing of filler cap Notice Warning 1. After adding fuel, close the fuel tank ● When unscrewing the fuel tank cap, pollute the environment. cap tightly and rotate it clockwise until if you hear a "hiss" of gas emission ●...
Inspection and adjustment before driving AdBlue filler 3. When the filling is completed, put the If your vehicle is a diesel vehicle with AdBlue cap back and rotate it clockwise high emission requirements (Euro VI), it is necessary to fill the AdBlue. until a “click”...
Page 104
Inspection and adjustment before driving Notice Warning Warning corrosive effect on copper, bronze, ● AdBlue that is rejected or heavily move to fresh air as soon as possible. contaminated shall be recycled to lead, zinc, aluminum, aluminum If the symptoms persist, please seek the manufacturer for centralized alloys, magnesium, magnesium for medical attention as soon as...
Inspection and adjustment before driving Adjustment of steering wheel 4. Push the locking handle to the highest Warning Adjustment of steering wheel position to lock the steering wheel. ● When driving the vehicle, the driver angle 5. Try to move the steering wheel up and must always hold the steering wheel down to ensure that the steering wheel rim with both hands at the 9 o'clock...
Inspection and adjustment before driving Rearview mirror Manual anti-glare interior rearview mirror Interior rearview mirror Notice When driving at night, you can operate the When the vehicle is stationary, select ● When cleaning the interior rearview a comfortable driving position, hold control handle to diminish the reflection of mirror, please use paper towels or the headlamp of the vehicle behind.
Inspection and adjustment before driving Automatic anti-glare interior Electrical adjustment of exterior 1.When the ignition switch is at "ACC" or rearview mirror rearview mirror "ON" position. 2.Turn the rearview mirror selector switch The exterior rearview mirror adjusting When driving at night, you can use this ①...
Page 108
Inspection and adjustment before driving Notice Notice Warning ● When the vehicle is powered off, the ● Always keep the rearview mirrors in ● Although curved (convex or electric folding function can still be a proper position and use them when spherical) rearview mirrors can driving to expand your vision and used.
Starting and driving Starting and driving Gear shifting ..............116 Running-in period ............. 104 Tire ................. 104 Engage P gear ..............117 Braking lining ..............104 Engage D/R/N gear ............117 Engage M gear ............... 117 Engine ................104 Notes during starting and driving ........105 Emergency unlocking of P gear ........
Page 110
Starting and driving Snow mode ..............123 Brake override system (BOS) ........131 Eco drive ................123 Parking braking system ............ 132 Suggestions for driving ..........123 Electronic parking braking (EPB) ........133 AUTO HOLD function (AUTO HOLD) ....... 134 Improve fuel economy and reduce CO2 emissions ..
Page 111
Starting and driving Exhaust gas recirculator(EGR) ........145 Forward Collision Warning (FCW) ........ 167 Rear-Autonomous Emergency Braking (R-AEB) ..168 Diesel particulate filter(DPF) ......... 145 Various driving situations ..........148 Autonomous Emergency Braking (AEB)......168 Do not drive after drinking ..........148 Driver Monitoring System (DMS) ........
Starting and driving Running-in period Check the engine oil level, tire pressure, Notice Notice coolant level and windshield washer fluid ● The braking lining and braking ● The initial running-in mileage of the level before driving. Pay attention to disc may wear to different degrees engine is 3,000 km.
Starting and driving Notes during starting and driving Tire pressure monitoring system Notice During driving, the tire pressure monitoring system can monitor the pressure and running-in of the engine. temperature in the vehicle tires. When the set value is exceeded, the system will give ●...
Page 114
Starting and driving Display of tire pressure and Notice Notice temperature ● If the tire pressure and its monitoring magnetic field area, the alarm will system abnormality alarm indicator be automatically released, which is stays on or flashes, please stop the normal.
Page 115
Starting and driving Rapid flashing: If the tire leakage rate is Notice Warning too fast, the tire and prompt flash quickly ● The tire pressure will be displayed to remind the driver that the tire leaks high speed, tires are easy to overheat, causing tires to burst and vehicle to gradually only when the speed is quickly.
Starting and driving Driving on bad road Highway driving and off-road After driving driving Before driving 1.After driving on a bad road, remove branches and other foreign matters Your vehicle is suitable for normal and 1.Plan the route in advance and try to avoid stuck to the radiator grille, bottom plate partial off-road conditions, so please avoid driving on bad roads.
Page 117
Starting and driving Warning Warning Warning ● When driving away from the (neutral gear)" engaged; otherwise, ● When driving the vehicle in the highway, be careful and avoid the vehicle may get out of control. 4WD mode, do not drive in a way entering dangerous areas.
Starting and driving Starting the vehicle Notes during starting the vehicle 4. Adjust the interior and exterior rearview Warning mirrors to proper positions. Before entering the vehicle, check the 5. Adjust the seat to a proper position to size and structure. vehicle status and surroundings.
Starting and driving Start switch Warning Warning ● In order to ensure the safe use of ● Be sure to carry the smart key with the vehicle, please ensure that you you when driving the vehicle. are familiar with the vehicle and its ●...
Page 120
Starting and driving When the brake pedal is depressed (AT Color of Warning Position Description model), press the START switch once to Indicator or towing the vehicle; otherwise, switch it to "ON" position and press it The steering wheel is incompletely burned fuel may enter twice to switch it to "OFF"...
Page 121
Starting and driving 2.Press the START switch to stop the 2. Depress the brake pedal and the Notice engine and switch it to "OFF" position. indicator turns green. (2)The smart key battery is too low; 3. When the smart key is in the sensing Warning (3)There are sites with facilities that area, press the START switch to start the...
Starting and driving Driving the vehicle Driving carefully measures should be taken: Vehicle pedal (1)Stay calm and do not panic. It is necessary to drive carefully to (2)Do not brake. ensure the safety and comfort of you and (3)Hold the steering wheel with both passengers.
Starting and driving Introduction to gears Warning Gears of the vehicle are introduced as follows: ● Objects in the driver's footwell may prevent the driver from operating Gear Symbol Application the pedal, which may easily cause the vehicle to get out of control, resulting in serious casualties.
Starting and driving Gear shifting Warning Warning Gear can be shifted normally after the ● Be sure to apply the parking brake Please park the vehicle in a safe engine is started. The brake pedal should or depress the brake pedal when place as soon as possible and contact be depressed all the time before the vehicle parking temporarily with the N gear...
Starting and driving ● Depress the brake pedal and pull the Notice gear shift backward to engage D gear; ● Depress the brake pedal, press the ● The vehicle will automatically shift UNLOCK button ③ and push the gear to P gear in the following conditions: shift forward to engage R gear;...
Starting and driving Emergency unlocking of P gear Notice If the gear shift cannot be switched from P ● The vehicle can shift to M gear only gear to other gears during normal operation, from D gear. the following 2 methods can be used for ●...
Starting and driving Start driving Method II 1. Stop the engine and apply the parking 1. Fasten the seat belt and confirm that the brake. parking brake has been applied. 2. Enter the bottom of the vehicle. 2. Start the engine. P-disengaging 3.
Starting and driving Use method of electric control 4WD Introduction to application Warning scenarios of drive mode ● When it is necessary to stop the vehicle temporarily at the slope, the Mode Application Scenarios brake pedal must be depressed or the parking brake must be applied;...
Starting and driving Switching of drive mode cluster displays "2H", the switching is Notice completed. Turn the 4WD mode knob to switch ● You can switch to 4WD mode after Switch from "2H/4H" to "4L" among 2H, 4H and 4L modes. When a several seconds after turning the 1.
Page 130
Starting and driving Warning Warning Warning ● For switching between 4L and h; otherwise, an alarm will occur otherwise, the transfer case may be other modes, the vehicle must be and vehicle components may be damaged. stationary. damaged. ● It is forbidden to perform 2WD hub ●...
Starting and driving Driving mode Eco drive Sport mode Driving mode switcher: toggle the switch Suggestions for driving forward and backward to select different With strong dynamic response capability, The following suggestions for driving can driving modes. it can meet the driving needs of high- improve the fuel economy of the vehicle speed and overtaking conditions and bring and reduce CO2 emissions.
Starting and driving fuel-efficient to drive at a proper constant Avoiding short-distance driving and removing unnecessary body components and accessories speed than to brake frequently and After starting the engine in cold state, The lighter the vehicle weight, the more accelerate rapidly.
Starting and driving Power steering system Emergency steering EPS system Notice The EPS system can automatically adjust If there is not enough braking space in ● The EPS system works only when the steering power according to the vehicle case of emergency, steering can be more the vehicle power system is running.
Starting and driving Service braking system accelerator pedal is the best way to deal Notice with steering sideslip. 3. Acceleration sideslip: too fast ● During emergency steering, the acceleration causes the driving wheel driver needs to hold the 9 o'clock to slip.
Starting and driving Brake friction lining wear Warning Warning warning ● Make sure that there is no object ● It is forbidden to adjust the brake When the brake friction lining is worn hindering the driver from operating pedal height and repair brake system to a certain limit, after the brake pedal is all pedals.
Starting and driving Brake assist system Electronic Stability Control The brake assist system includes ESC, Warning (ESC) ABS, TCS, HAC, HBA, BOS, EBD, etc. Different vehicle configurations may be risks when driving on slippery roads. Under some driving conditions, ESC can different, so refer to the specific vehicle ●...
Starting and driving ESC cannot always deal with complex Hill Descent Control (HDC) ESC should always be on during driving. driving conditions as effectively as when When ESC works, the indicator The Hill Descent Control (HDC) system running at low speed. flashes on the instrument cluster.
Starting and driving red indicator light on the instrument distance may be longer when braking on Warning panel lights up. sand and gravel roads, snow and ice roads or wet and slippery roads than when using ● HDC only serves as an auxiliary Notice conventional braking systems.
Starting and driving Electronic brake force Hill-start assist control (HAC) At this moment, never reduce the force on distribution system (EBD) the brake pedal. Both leaving the brake Hill-start Assist Control (HAC) can help pedal and reducing the force on the brake the vehicle to keep braking for several When the vehicle brakes, EBD will pedal will cause the automatic turning off...
Starting and driving Parking braking system Warning Warning Notice ● Do not park on combustible ● P is not needed during short-term ● Never drive the vehicle when the parking because the vehicle will materials such as hay, waste paper or parking braking has been applied;...
Starting and driving Electronic parking braking Automatic applying of parking braking Warning (EPB) during engine stopping ● Improper use of the electronic When the vehicle and the engine stop, EPB The switch position of EPB is shown in the parking brake may cause accidents will be automatically applied.
Starting and driving Manually turning on and off the AUTO Requirements for using the AUTO Warning HOLD function HOLD Function 1.The driver's door is closed. Press the AUTO HOLD switch once, and even if the parking braking has been 2.The driver has fastened the seat belt. the AUTO HOLD function will be turned applied.
Starting and driving Panoramic parking view system Warning Warning The panoramic parking view system ● Because of weak light at night, the ● Serious injury or death may be caused generates panoramic images around a panoramic parking view system if the warnings and instructions on the vehicle by processing the multi-channel will have "noises"...
Starting and driving Turn on or off the panoramic surround view, click the front/back/ parking camera system left/right areas, and you can switch to 1. Switch the gear shift to the forward the corresponding "2D single view + gear, keep propelling speed of the radar".
Starting and driving Reversing radar system 3D display image switched to a right-angle 3D panoramic The reversing radar system judges whether display image. When the right steering there are obstacles in front of and behind switch signal leaves, the image will return the vehicle according to the ultrasonic to the previous 3D panoramic display ranging principle of the radar sensor, and...
Page 146
Starting and driving Warning Notice Warning accidents. ● When there are several obstacles, ● The sensor system may not the reversing radar sensor can only ● The reversing radar system is an recognize a cloth or sponge that can detect the nearest obstacle. When auxiliary system that can't predict absorb frequencies.
Starting and driving Activating or deactivating the Warning forms of the reversing starts, the system will conduct a quick self- reversing radar system check to ensure the normal working of radar system each component, and the self-check results Activating the reversing radar Based on the distances of obstacles are shown in the table below: system...
Starting and driving Six-radar detection area poles, little trees, bikes, and footstones). Front Radar Rear Radar Be aware that in the following cases the Buzzing Area reversing radar system may give a false Frequency Side Middle Side alarm: 1. When the surface of the reversing radar >...
Starting and driving Reversing visual system Through the wide-angle camera layout on When reversing, you should note whether Warning the back of the vehicle, the information on there are obstacles in the images. Reversing the road behind the vehicle can be clearly auxiliary lines will be displayed in the are dead zones that can't be observed displayed on the multi-media display...
Starting and driving Cruise control system Activating or deactivating the While driving at high speed on straight, Notice reversing visual system smooth highways, the cruise control ● The display screen can only display system allows the user to keep the vehicle Activating the reversing visual two-dimensional images captured by at a certain speed without stepping on the...
Starting and driving How to use the cruise control 3. Release the accelerator pedal, and the Warning vehicle will keep driving at the set speed. seat after CCS is activated. Cruise deceleration ● After the cruise control system starts and you want to speed down Any of the following methods can be used quickly, press the brake pedal as for cruise deceleration:...
Starting and driving Emission control system Cruise acceleration control system is temporarily cancelled but Warning not turned off, and the instrument range Any of the following methods can be used indicator light is white. Cruise control ● Do not modify any part of the engine for cruise acceleration: needs to be restored.
Starting and driving Diesel particulate filter(DPF) Compared with the traditional mechanical Warning pump, the high-pressure common rail Function description system can realize precise fuel injection ● Do not use leaded gasoline or DPF is a filter installed in the exhaust control, automatic adjustment of fuel gasoline with more than the standard system of the diesel engine (Euro VI) that...
Starting and driving the vehicle propels at a low speed for long, Precautions before starting 1. Driving regeneration it should be driven at a high speed for 10 This process is controlled by ECU, and 1.The vehicle must be in the parking state, minutes (>...
Page 155
Starting and driving Activating parking regeneration Notice Warning ● If the DPF indicator still flashes ● The company will not be responsible after the regeneration, we suggest for any environmental protection you perform the parking regeneration issue and damage arising from the operations again.
Starting and driving Various driving situations Do not drive after drinking Notice Notice Never drive after drinking or taking ● Adjust the interior rearview mirror to ● When the vehicle turns or curves, medicine. reduce the glare of the headlamps of please carefully observe the road.
Starting and driving Driving on rainy and slippery Driving the vehicle through Warning roads deep water ● When driving through water, muddy It is dangerous to drive on rainy days In order to avoid damaging the vehicle roads, or other road conditions, the and slippery roads, especially without when driving through water, pay attention braking effect may be impaired and...
Starting and driving Driving on slopes and Precautions for climbing over the top Notice mountainous roads of the slope ● The engine, gearbox, chassis or 1. Pay special attention when climbing If you often drive on steep mountainous electric appliances may be damaged over the top of the slope, because there roads or if you intend to, the following if you drive through water.
Starting and driving Parking on slopes Warning Warning Steps of parking: ● Strong braking when you drive must immediately turn the vehicle 1. Apply the parking braking. downhill may cause overheating towards a gentle slope. 2. Place the gear shift in neutral. and failure of the brake, making the 3.
Starting and driving Driving in cold weather (2)When you drive uphill to park the Battery vehicle and there are curb stones, turn In a freezing climate, if the vehicle has the wheels away from the curb stones, Warning a low battery, the battery fluid will be slowly move the vehicle backward until frozen and the battery will be damaged.
Starting and driving Highway hypnosis Checking the vent 4. If necessary, anti-slip chains can be The vent of the air-conditioner should be used. Verify whether the size of the anti- Highway hypnosis refers to the drowsiness cleaned after heavy snow. slip chain is consistent with that of your felt by the driver on a gently extending vehicle tire, and install it according to...
Starting and driving Adaptive Cruise Control (ACC) Selecting the smart cruise assist mode in Warning MP5 makes it possible to keep the vehicle With the adaptive cruise control system running in the middle of the lane line ● The system can only be used when activated, your vehicle can automatically during cruising.
Page 163
Starting and driving Warning Warning Warning ● The ACC system does not respond to vehicle ahead may be delayed or adjacent lane or another vehicle on pedestrians. disrupted, in which case the vehicle an adjacent lane runs too close to ●...
Page 164
Starting and driving Warning Warning Warning by electromagnetic interference, if the target vehicle ahead starts and unable to work properly, resulting in resulting in delay or interference. accelerates after a long time, the ACC reaction errors. ● The field of view of the front driver needs to slightly depress the ●...
Page 165
Starting and driving Use of switches 3.Cruise cancel button Warning Press the button to cancel the compromised radar performance cruise control. or abnormal function. Please clean the surface of the radar in a timely 4.Adjustment of following distance manner. By default, the following ●...
Page 166
Starting and driving Setting adaptive cruise control system When the current radar detects the target Service conditions vehicle ahead, the instrument will display The activation method of the adaptive To activate the ACC system, the following the target vehicle ahead. If the distance cruise control system is consistent with that conditions must be met: from the vehicle ahead becomes closer and...
Starting and driving Electronic differential lock Manual locking and unlocking Differential lock introduction Exit the adaptive cruise control system Exit the adaptive cruise control system as When a drive wheel slips, the differential follows: lock will ensure that the other drive wheel 1.Slightly depress the brake pedal.
Starting and driving Blind Spot Detection (BSD) the rear axle differential lock indicator The blind spot detection system monitors Warning (yellow) on the instrument flashes for a the blind spot in the driver's view through few seconds and then goes out, it indicates two rear millimeter-wave radars.
Page 169
Starting and driving Display mode Warning Notice The blind spot detection system helps the cannot guarantee 100% detection ● To avoid affecting the system driver understand the traffic conditions of conventional vehicles within the function, there should be no foreign in the blind spots of the exterior rearview blind spot (such as sedans, trucks, objects obstructing the radar sensor...
Starting and driving Blind Spot Detection Lane Change Assist (LCA) Enhanced display mode: When the system detects that there are other vehicles The system detects the distance and speed in the rear blind spot and that the turn difference between the approaching vehicle signal of the monitored direction is turned and the vehicle.
Page 171
Starting and driving The system determines the steering Cross Traffic Alert (CTA) Door Open Warning (DOW) intent based on whether the turn signal is When the vehicle is shifted into N gear turned on, and reminds the driver at the or parked in P gear, due to the limited corresponding display mode.
Starting and driving Lane Departure Warning (LDW) Rear Collision Warning (RCW) Warning If your vehicle is equipped with the lane When targets such as other vehicles in this ● The lane departure warning system departure warning system, the system lane are close to the vehicle and there is a is an auxiliary tool for drivers.
Page 173
Starting and driving Click [Settings] → [Assistance] in MP5 to When the lane departure warning system Warning set the switch, mode and sensitivity of lane detects that the vehicle has deviated from departure. the lane line, the corresponding side lane system will not be able to give a line is displayed in red.
Starting and driving Lane Keeping Assist (LKA) If your vehicle is equipped with the lane Warning Warning keeping assist function, the system will monitor the lane ahead in real time through well marked. ● If the front windshield where the the front camera.
Starting and driving Forward Collision Warning (FCW) How to use LKA when the vehicle is about to deviate from the lane, it will correct the steering If your vehicle is equipped with forward Users can activate or deactivate the lane wheel to make the vehicle return to collision warning function, an alarm will keeping assist system through [Settings]...
Starting and driving Rear-Autonomous Autonomous Emergency Braking (AEB) Emergency Braking Instrument cluster prompt interface: (R-AEB) If your vehicle is equipped with autonomous emergency braking function, The rear-autonomous emergency braking it will work in conjunction with the system is a low-speed astern active safety forward collision warning (FCW).
Starting and driving Driver Monitoring System (DMS) Warning Warning When the vehicle is running, monitor the cannot be detected by the system or degraded in some cases, such as driver's status during driving through the is detected too late. loss of monitoring data due to driver monitoring camera installed on the ●...
Starting and driving Traffic Sign Recognition ( TSR ) Notice Notice The traffic sign recognition function ● When the system detects that control of the vehicle" and emit recognizes the speed sign through the the driver is in a distracted state high-frequency audible alarm as a camera on the front windshield, observes or cannot be recognized within...
Starting and driving Speed Limit Assist(SLA) Intelligent Adaptive Cruise Control(IACC) After the traffic sign recognition function Notice is activated, the intelligent speed limit Function Introduction ● The traffic sign information function assistance function can be activated. After the Traffic Sign Recognition (TSR) can only function normally when the After the traffic sign recognition function function is activated, theIntelligent...
A/C and infotainment system A/C and infotainment system A/C system ......................................174 Air outlet ......................................175 Wind direction adjustment ................................176 A/C control switch ..................................177 A/C control ...................................... 180 Defrosting in summer (Manual) ..............................182 Infotainment system ................................... 183...
A/C and infotainment system A/C system The A/C system heats, cools and Warning Notice dehumidifies the air inside the vehicle. ● The A/C system can only work when ● Don't keep the air internal circulation When the windows are closed, the A/ C system works at the max.
A/C and infotainment system Air outlet Air outlet positions of A/C are shown in the figure. (Check and compare positions of the right and left rudder.) 5. Rear air outlet Notice ● Rollers at the rear air outlet are capable of regulating the air volume. 1.
A/C and infotainment system Wind direction adjustment Notice ● Do not place food, drugs, or any other heat sensitive items in front of the air outlet, which may cause the food or drugs deteriorated or damaged. 6. Armrest box air outlet Notice Take the air outlet at the side of passenger.
A/C and infotainment system A/C control switch The major operation button of A/C is integrated in the multimedia display screen. The state bar at the bottom of the main column is designed with common operation buttons for A/C. Slide up the state bar at the bottom to enable full-screen popup display. BT Music AUTO Radio...
A/C and infotainment system 1. A/C system ON/OFF Symbol Mode Notice Air blows to the upper body of Click the button, start the ● The internal circulation mode shall passenger. A/C system, and restore be enabled under such circumstances Air blows to the upper body by default the latest state as the tunnel, traffic jam, dirty air and foot of passenger.
Page 187
A/C and infotainment system 7. Temperature adjustment 10. Max. cooling power There are some A/C operation buttons below the multimedia display screen, Adjust temperature of A/ Click the icon to enable which can make it more convenient for C system. "LO" indicates the max.
A/C and infotainment system A/C control Function Description Cooling, heating, defrosting, demisting Adjust the air volume of A/C: the larger the number, the Air volume OFF and any other related functions are ① higher the fan speed. introduced below. Click this button. Press once and the air volume is Cooling Air volume up ②...
Page 189
A/C and infotainment system HI, the highest temperature is reached. Notice Notice 3.Air outlet mode control ● When the Face mode is enabled, at ● Rapidly increase the temperature in Air outlet mode under automatic control least one air outlet on the instrument passenger area by enabling the max.
A/C and infotainment system Defrosting and demisting in winter Demisting in summer (AUTO) Notice (AUTO) Under AUTO control, and when demisting ● Provided that the vehicle is parked Under AUTO control, and when defrosting mode enabled, implement the demisting in scorching weather for a long mode enabled, implement the defrosting function.
A/C and infotainment system Infotainment system Infotainment system includes bluetooth, Notice Notice radio and other functions. Please refer to circulation of the lubricant, and kept the separate infotainment system manual C will not be automatically started the best working state of the system. for detailed instructions.
Emergency Hazard warning device Hazard warning flasher Warning triangle flasher switch again. The hazard warning flasher shall be There is a triangle mark on the hazard enabled to warn other drivers under the warning lamp switch, as shown in the following circumstances: picture.
● If the vehicle has been fitted with tires ● During driving, and if the warning 1. On general roads, place the warning not approved by JAC, the normal lamp indicating the abnormal triangle 50 m away from the direction of...
Emergency Replacement of spare tires Secure parking Preparation of tools Introduction of on-board tools 1. Turn on hazard warning flasher. Different models complete with different 2. Drive the vehicle safely off the road and on-board tools. away from traffic. 3. Park the vehicle on a flat surface, apply the parking brake, and shut down the engine.
Emergency Removal of spare tires 2. Insert the cranking bar ⑦ of the 3. Rotate the wheel nut wrench ⑤ combined crank into the central oval counterclockwise on the other end of the 1. Two lifting levers ④ , cranking bar ⑦ opening below the tailgate panel and combined crank, and the spare tire will and wheel nut wrench ⑤...
Emergency Chock wheels Removal of tires 2. Turn the jack adjustment knob in clockwise direction by hands, until the Place suitable stoppers at the front and rear 1. The wheel nut wrench is used to loosen height of jack reaches that of the lifting of the diagonally opposite wheels of the the wheel nuts counterclockwise in position.
Page 199
Emergency 3. Locate the jacking point of the vehicle 4. Place the jack on a flat and hard ground, 5. The cranking bar ⑦ of the combined jack, as shown in the figure. and adjust the jack position so that it crank used for removal of spare tire is caused to clamp the handle of the jack.
Emergency Installation of spare tires Warning 1. Remove any dirt or dust from the wheel ● Top or bottom of the jack is not and hub surfaces. allowed to be underlaid with any 2. Carefully install the spare tire and pre- pad.
Emergency Jump start Introduction Warning Warning If the battery has run out of power or is not ● Do not use wheel nuts not equipped shall not exceed 200km. It is sufficient to start the vehicle, try starting with this vehicle. The use of suggested to replace with standard your vehicle with another vehicle and by incompatible wheel nuts or improper...
Emergency Preparations Start 1. One end of the positive electrode cable (+) is connected to the positive electrode Color marking of jumper cables 1.The vehicle is at Gear P. (+) of battery A of the discharging 2.Apply the parking brake. The positive cable is usually marked in vehicle.
Emergency Push start Getting vehicle out of trap Don't intend to start the vehicle via running at idle speed as possible. Gently Warning step on the acceleration pedal. pushing. Otherwise, parts and components 5. If it fails to get the vehicle out of trap of the vehicle may be damaged, or even ●...
Emergency Vehicle towing Towing with a trailer hook Using a professional vehicle for Carry out the vehicle towing with towing flat truck The vehicle is only equipped with two front trailer loops, located in the front end area Vehicle towing must comply with local of the chassis.
Emergency Trailer Notice After connecting the trailer according ● After placing the ignition switch in to the manufacturer's instructions, it is the "ON" position, the turn signal necessary to first connect the trailer cable and position light of the rear trailer before driving to ensure that the front car's will light up for 3 seconds and then light control switch can control the trailer's...
Emergency Emergency in driving Engine stalling Engine overheating The engine is in normal state, but cannot be started. 1. Gradually slow down, keep driving in If the water temperature gauge indicates 1. Check the fuel level. a straight line, and carefully drive the engine overheating, engine output power 2.
Emergency Emergency hammer The emergency hammer is located inside 4. Check and make sure whether the water Warning pump belt is tight. If the belt is in good the armrest box and is used in emergency situations where it is necessary to break state, then check if the coolant leaks ●...
Page 208
Emergency of the window glass. Do not hit the central part, because it is the strongest. 3.Confirm the effect of the broken window, confirm whether the glass debris affects the escape route after breaking the window, and clean up the debris as far as possible. If the glass does not fall off immediately after breaking, you can kick it away with your foot.
Cleaning and maintenance Cleaning and maintenance Instructions on cleaning and maintenance ............................202 External cleaning and maintenance ..............................203 Exterior washing ..................................... 203 Waxing and polishing ..................................204 Vehicle bottom ....................................205 Clean the windows and exterior rearview mirrors .......................... 205 Clean the wheels .....................................
Cleaning and maintenance Instructions on cleaning and maintenance Regular and professional maintenance Warning Warning helps to preserve the value of vehicles. This is also one of the conditions for claiming ● Vehicle maintenance materials must are toxic and highly combustible be stored in a safe place, and out substances, which are easy to cause compensation in case of body corrosion...
Cleaning and maintenance External cleaning and maintenance Exterior washing Environmental Protection Warning The longer insects, bird droppings, resin, ● Vehicles can only be washed at hands and arms. road dust, industrial dust, tar, soot, anti- specially designated washing points ● When cleaning, avoid direct flushing slip salt and any other corrosive materials to prevent sewage polluted by oil, of the air inlet by opposing against...
Cleaning and maintenance Waxing and polishing Notice Notice Waxing ● The temperature of the water used ● The new vehicle needs to be waxed Regular waxing is auspicious to protecting for washing shall not exceed 60 °C. after being used for at least 6 the paintwork of the vehicle body.
Cleaning and maintenance Vehicle bottom Remove residual wax Exhaust pipe and muffler Residual wax must be removed with a Vehicle bottom has been specially treated. Visually check the exhaust pipe, muffler special cleaning agent. For more detailed Damage to the protective layer during and hanger for cracks and damage.
Cleaning and maintenance Clean the wheels Warning Please clean wheels and trim frequently ● Unclean window glass inevitably to maintain a clean appearance. It is reduces visibility and increases the recommended to clean wheels with a risk of accidents and injuries. neutral soap solution or detergent.
Cleaning and maintenance Interior cleaning The longer the stain remains on auto components, the harder it is to be cleaned and treated. Stain that remains on the surface of the parts and components over a long period may not be cleaned. Cleaning and maintenance of parts and components of vehicle are listed in the table below for reference.
Page 216
Cleaning and maintenance Materials Conditions Recommendations New stain: It is suggested to remove the new stain with the stain remover applicable for leather treatment. Oil stains, such as machine oil, cosmetics, etc. Dry stain: Treat with the grease dissolving spray. Special dirt, such as ballpoint pen ink, nail It is suggested to be treated with the stain remover applicable for leather polish, latex paint, shoe polish, blood stain, etc.
Cleaning and maintenance Anti-rusting treatment Temperature Common factors of automobile Warning rust High temperatures can accelerate the ● Do not flush dirt, sand, or other corrosion process of poorly ventilated Wet dirt and debris pile up in the vehicle debris from the passenger cabin with components.
Maintenance and do-it-yourself Maintenance requirements Vehicle maintenance includes regular Warning Warning and routine maintenance. Some routine important factor affecting the accessories such as rings and and regular maintenance is crucial to maintaining the good mechanical condition, safety, economy, and environmental watches before servicing the vehicle.
● When the ignition switch is in the Improper disposal of engine oil, We strongly recommend using JAC's "0N" position, do not disconnect engine coolant, and other vehicle oils genuine spare parts when repairing or the harness connector of the will damage the environment.
Maintenance and do-it-yourself Routine maintenance Routine maintenance includes items to be checked during normal daily vehicle operation. This ensures that your vehicle continues to operate normally. Routine maintenance checks require only low mechanical skills and some common automotive tools. These checks can be completed by you or qualified technical personnel, or by an after-sales service shop if necessary.
Page 223
Maintenance and do-it-yourself Check Items Check Scope Engine Check fuel, it should be sufficient and check engine startup for any abnormality Whether it swings and whether the clearance is normal Steering wheel Check steering wheel operation for any abnormality Check free travel of brake pedal for any abnormality Brake Check whether the brake functions normally Check electronic parking switch for any abnormality...
Maintenance and do-it-yourself Cleaning and anti-corrosion the cleaning agents and preservatives Notice treatment of engine recommended by the manufacturer and compartment has installed the required equipment. ● When cleaning the engine, the When operating on the engine or in the residual gasoline, grease, and oil will The exterior surfaces of the engine engine compartment, such as checking...
Maintenance and do-it-yourself Engine coolant The vehicle coolant not only provides engine cooling system. When adding or Warning antifreeze protection in low temperature replacing the coolant, select the appropriate ● It is prohibited to use coolant that environments, but also protects all light concentration according to the following does not meet the standards and alloy components in the cooling system...
Maintenance and do-it-yourself Inspection of the engine coolant Environmental Protection Warning level ● Please dispose of used coolant between various additives are likely according to local relevant to occur, resulting in additive failure. environmental protection laws. ● Undiluted coolant is flammable and can cause combustion if splashed onto a hot exhaust pipe.
Maintenance and do-it-yourself Engine oil Replacement of engine coolant Checking the engine oil level The expansion tank for the engine coolant is located on the left side of the engine Engine coolant needs to be replaced 1. Park the vehicle on a flat surface and compartment.
Page 229
Maintenance and do-it-yourself Warning Notice ● Under no circumstances should ● It is normal to add some engine oil oil level exceed the "MAX" mark during the regular oil maintenance on the scale, otherwise oil will interval or during the running-in be sucked into the intake system period of the vehicle, depending on through the crankcase vent, and after...
Maintenance and do-it-yourself Replacement of engine oil and oil Replacement of engine oil and Warning filter oil filter cancer. 1. Remove the engine bottom guard (if The engine oil and oil filter must be ● Please store used engine oil in a any).
Maintenance and do-it-yourself Transmission oil Air filter Filling of oil Transmission oil must be replaced at the intervals specified in the Warranty and 1. Refill with the recommended engine Maintenance Manual. For inspection or oil and amount. Do not remove the oil replacement, please contact the after-sales dipstick when filling engine oil.
● Genuine components of JAC should 2. Depress the brake pedal and start the be used; if not, it may not be possible engine. The pedal height should be to filter out dust and particles in the lowered.
Maintenance and do-it-yourself The brake fluid in the brake fluid reservoir Brake fluid 30 seconds. The pedal height should should be checked regularly. The liquid remain unchanged. Brake fluid inspection level must always be between the MAX 4. Release the brake pedal, let the engine and MIN marks.
Maintenance and do-it-yourself Replacement of brake fluid Warning Warning Brake fluid absorbs moisture. Therefore, ● It is prohibited to mix brake fluid of can cause decreased vision. If brake as time goes by, it absorbs moisture from different manufacturers and different fluid spills on the car, be sure to the surrounding air.
Maintenance and do-it-yourself Windshield washer fluid Warning Environmental Protection ● Use special washer fluid as much as ● Brake fluid can pollute the possible. environment, so please dispose of ● If the air temperature is likely to used brake fluid in accordance with drop below 0℃, windshield washer relevant environmental protection fluid with antifreeze performance...
Maintenance and do-it-yourself Windshield wiper blade Replacement of wiper blade position. 4. When the ignition switch is in the "ON" Wiper blade cleaning Front wiper maintenance position position, push the wiper control lever Check the working and wear of the wiper up to the "MIST"...
Maintenance and do-it-yourself Replacement of wiper blade Vehicle battery Warning ● Worn wiper blades may damage the windshield and affect the driver's vision. ● Before the new wiper blade is inserted, do not turn back the wiper arm; otherwise, the front windshield may be damaged.
2. Keep terminals and joints clean, tight this vehicle has been strictly designed and 3. Clean the terminal with terminal and coated with vaseline or terminal arranged, and has special safety. The JAC cleaning tools. grease. original battery complies with relevant 4.
Maintenance and do-it-yourself Fuse replacement 7. Reconnect and tighten the positive (+) Warning To prevent damage to the circuit system terminal, and connect the negative (-) caused by short circuits or overload, each occur. terminal. circuit is equipped with a fuse. If a fuse ●...
Maintenance and do-it-yourself Engine compartment Passenger compartment Steps of fuse replacement: ① Normal fuse 1. Turn off all electrical components. ② Blown fuse 2. Confirm that the start switch in the "LOCK" position. 3. Remove the fuse box cover. 4. Determine whether the fuse is damaged by finding out a blown fuse.
Maintenance and do-it-yourself Replacement of bulb Regularly check the operation conditions 5. Use a fuse extractor to remove the Warning of the exterior lights. Damaged bulbs will damaged fuses. The fuse extractor is in reduce the vehicle visibility and weaken ●...
Maintenance and do-it-yourself Wheel Tire pressure The hub and wheel should be cleaned Warning during regular car washing, and the Tire pressure label the battery negative cable must be damaged protective paint should be disconnected first to avoid damage repaired before it rusts. to the bulb and the harness in the car.
Maintenance and do-it-yourself Tire inflation pressure The air pressure of all tires should be Warning checked with the tires completely cooled, Warning vehicle load. and should be adjusted in accordance with ● Do not lower the tire pressure when the air pressure standards indicated on the ●...
Maintenance and do-it-yourself Tire type Tire chain Warning Universal tires in all seasons The use of tire chains is prohibited in some much as possible, as the use of tire areas. Please get familiar with the local The Company has equipped some models chains may adversely affect vehicle laws before installing a tire chain.
Maintenance and do-it-yourself Tire rotation Tire wear and damage Tire rotation should be performed every 8,000 km to 13,000 km. Once abnormal tire wear is found, carry out tire rotation and check wheel alignment as soon as possible. Check the tire dynamic balance during tire rotation.
Maintenance and do-it-yourself or sidewall, cracks in the tread grooves, Replacement of tires and wheels Warning and delamination on the tire sidewall). If The after-sales service shop will provide damage is observed or suspected, a tire first 500 km mileage. tire information approved by the Company professional is required to check the tire.
Maintenance and do-it-yourself Wheel adjustment and balance When driving on a flat and straight road surface, if the vehicle always leans to one side, or you notice uneven or abnormal wear of the tires, the wheels must be adjusted at this time. At normal speed, if the steering wheel or seat vibrates, it is necessary to carry out wheel balance.
Need help?
Do you have a question about the T9 and is the answer not in the manual?
Questions and answers