Table of Contents
Advertisement
Quick Links
DAeLECTRONICS
MANUALE D'USO – OPERATIONAL MANUAL
Grazie per aver acquistato il
. Per favore leggete questo manuale con
iCtrl-R mini
cura per imparare tutte le funzioni dell'
ed usarlo al meglio per molto tempo. Conservate
questo manuale per la consultazione quando sarà
necessaria.
www.daelectronics.com
iCtrl-R-mini
pocket MIDI CONTROLLER
DAeLECTRONICS
iCtrl-R mini
info@daelectronics.com
da_electronics
daelectronics pedals
daelectronicscontroller
Thank
you
very
much
DAeLECTRONICS iCtrl-R mini
manual carefully to learn about all the functions of the
so that you will be able to use it fully for
iCtrl-R mini
a long time. Keep this manual in a convenient place for
reference when necessary.
for
purchasing
the
. Please read this
Advertisement
Table of Contents
Related Manuals for DAELECTRONICS iCtrl-R-mini
Summary of Contents for DAELECTRONICS iCtrl-R-mini
- Page 1 DAeLECTRONICS . Per favore leggete questo manuale con . Please read this iCtrl-R mini DAeLECTRONICS iCtrl-R mini cura per imparare tutte le funzioni dell’ manual carefully to learn about all the functions of the iCtrl-R mini ed usarlo al meglio per molto tempo. Conservate...
- Page 4 Calibration Before you start using the Expression pedal (the pedal shall ALWAYS be disconnected/connected to the controller before energizing the controller itself) you need to activate the "Calibration" by pressing the switch 1 in mode 1 until the rapid flashing of the LED 5.Immediately after entering the calibration mode, depress the pedal backwards to the minimum heel setting then sweep to the maximum toe setting, this will ensure you calibrate your pedal with the .
- Page 5 MODE 2: TUNER/TAP TEMPO MODE In this mode you can easily access to tuner and to tap tempo. A long press of switch 3 will enter in this mode and led 9 will blink. TUNER AND TAP TEMPO SELECTION Switch 3 > just click to activate the Tuner. Led 3 will switch on. ...
- Page 6 External Expression pedal When an expression pedal is connected to an iCtrl-R mini , it will be always active and communicates via the control change # 02 (values f rom 01 to 127). In addition when the pedal is set at minimum heel a CC # 77 with value =0 will be sent after 800 millisecond, a CC # 77 with value =127 will b e sent when the pedal is at maximum toe setting after 800ms.
- Page 8 LECTRONICS MADE IN ITALY www.daelectronics.com...
Need help?
Do you have a question about the iCtrl-R-mini and is the answer not in the manual?
Questions and answers