Table of Contents
Advertisement
1 Specifications
Speakers (SB-MAF6000PU/GS, SB-MAG6000PU/GS)
Speaker unit(s)
Tweeter
Woofer
Impedance
Dimensions (W x H x D)
Mass
Subwoofer Speaker (SA-MAW6000PU/GS)
Speaker unit(s)
Super Woofer
2 Disassembly and Assembly Instructions
Caution Note:
• This section describes procedures for checking the operation and replacing the main components.
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
edges.
• During replacement of component parts, please refer to the section of "Replacement Parts List" as described in the service man-
ual.
• Select items from the following indexes when disassembly or replacement are required.
Speakers (SB-MAF6000PU/GS, SB-MAG6000PU/GS)
• Disassembly of Front Panel Block
• Disassembly of Tweeter Speaker (SP1)
• Disassembly of Woofer Speaker (SP2)
• Disassembly of Lighting Wire P.C.B. Assembly
Subwoofer Speaker (SA-MAW6000PU/GS)
• Disassembly of Front Panel Block
• Disassembly of Subwoofer Speaker (SP3)
• Disassembly of Lighting Wire P.C.B. Assembly
6 cm cone type
20 cm cone type
3 Ω
407 mm x 260 mm x 258 mm
5.5 kg
30 cm Cone type
Impedance
Dimensions (W x H x D)
Mass
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
2
6 Ω
402 mm x 450 mm x 386 mm
13 kg
Advertisement
Table of Contents
