1 Specifications Notes: Speakers 1. Specifications are subject to change without notice. Speaker unit(s) Mass and dimensions are approximate. Tweeter 6 cm cone type 2. Total harmonic distortion is measured by the digital spectrum ana- Woofer 20 cm cone type lyzer.
2.5. Disassembly of Lower Front Step 2 : Insert flathead screwdriver into the grooves. Step 3 : Insert a steel rule between the Lower Front Panel Panel Block Block and Speaker Cabinet. Step 4 : Apply light force to push the Lower Front Panel Block. Step 1 : Remove 4 screws.
Step 6 : Lift up the Himelon. 2.6. Disassembly of Subwoofer Step 7 : Detach 4P Socket. Speaker (SP3) Step 8 : Remove Lower Front Panel Block. • Refer to “Disassembly of Lower Front Panel Block” Step 1 : Remove 8 screws. During assembling, please do following Step 1 : Remove and clean up the bosses and holes.
4.3. Replacement Parts List 4.3.1. Speakers Safety Ref. No. Part No. Part Name & Qty Remarks Description RMQ2448 EVA PACKING GS,E RMQX0285-K EVA PACKING Safety Ref. No. Part No. Part Name & Qty Remarks XTB3+10GFJK SCREW Description XTB4+10GFJ SCREW XTB4+16AFJK SCREW CABINET &...