Advertisement
• When a map is displayed, rotate the dial to change
the map scale. Rotating it clockwise reduces the
scale, showing less area with greater detail. Rotating
it counterclockwise increases the scale, showing
more area with less detail.
VOICE CONTROL SYSTEM
Voice recognition is controlled by the NAVI TALK and
NAVI BACK buttons. This is intended as the primary
way to give commands to the system. Using the
buttons and interface dial allows the passenger to
operate the system and should be considered a
secondary method for the driver.
NAVI/HFL MICROPHONE
(on the ceiling)
NAVI TALK – Press and release this button to activate
the voice control system. After pressing and then
releasing the NAVI TALK button, wait for the beep, and
then speak the command.
NAVI BACK – This does the same function as the
CANCEL button. Press this button to return to the
previous display. After the previous display appears,
the system prompts you for a command and then
beeps. Press and release the NAVI TALK button to
give the desired command.
Microphone – Receives voice commands.
2 of 6
HFL TALK BUTTON
HFL BACK BUTTON
NAVI TALK
BUTTON
NAVI BACK
BUTTON
The navigation system communicates through the
audio speakers. When the navigation system is giving
guidance instructions, it is through the front speakers.
When you are using the voice control system to give
commands (by pressing the NAVI TALK or NAVI BACK
buttons), the front and rear speakers are muted.
The voice command list can be viewed or heard by
pressing the INFO button and selecting Voice
Command Help. A tutorial is included that explains the
operation of the voice control system. Refer to the
quick start guide and the navigation system manual for
detailed information.
Improving Recognition
To help the system understand your voice commands,
follow these guidelines:
• Adjust the airflow from the center and side vents so
that it does not blow against the microphone on the
ceiling. Place your hand near the microphone and, if
you feel any breeze, adjust the vents.
• Close the windows and the moonroof.
• Set the fan speed to low (1 or 2).
• After pressing the NAVI TALK button, wait for the
beep, and then give a voice command.
• Give a voice command clearly, in a natural speaking
voice, without pausing between words.
• Make sure the correct screen is displayed for the
voice command you are giving (refer to the
navigation system manual).
NOTE:
• If the system cannot recognize your voice command,
speak louder.
• If the microphone picks up voices other than yours,
the system may misinterpret your voice commands.
• If you speak a command with something in your
mouth, or with a heavy accent, the system may
misinterpret your voice commands.
NAVIGATION SYSTEM SETUP AT THE TQI
The navigation system is basically ready to use when
the vehicle is delivered to the dealership. Since the
system interfaces with other systems in the vehicle, it is
important to ensure that all of the systems are
initialized so they will work properly for the client. To
initialize the system, follow this procedure:
1. Do the normal TQI of the vehicle, including the
audio system. The navigation system voice will not
function until you enter the 5-digit anti-theft code for
the audio system.
06-038
Advertisement
