Advertisement
TOOLS AND EQUIPMENT (CUSTOMER SUPPLIED)
Drilling Tools: 3/8" Power Drill (for drill screws)
3/16" drill bit (for pilot drilling drill screws)
Measuring Tools: Tape Measure
4' level
Hand Tools: Drift Pin (for aiding hole alignment)
Socket & Wrench Sizes 3/8" & ¾"
Impact Wrench (pneumatic or electric)
Excavating Tools: Spade Type Shovel
Equipment to dig foundation
Special Tools: Movable Scaffolding, Man Lift, or Ladders
Crane or similar device to safely lift 20 ft' high
and 700 lbs.
Materials (Customer Supplied):
1/2" washers (4)
1/2" nuts (4)
Anchor bolts, 1/2" thread, 70 ksi min. tensile strength (4)
Duct Tape
Rope or straps to lift assembled frame
Bolts should be installed to a snug-tight condition, which is defined as: the tightness
attained by either a few impacts of an impact wrench or the full effort of a worker with a
wrench that brings the connected plates in to firm contact.
BOLT INSTALLATION
6
Advertisement
