Pro-tec SAFEGUARD LIVESTOCK SHADE SHELTER 16' X 24' Manual page 14

STEP 8.1 USING A MAN LIFT OR LADDERS, PLACE ROLLED UP PANEL ON TOP OF FRAME ASSEMBLY.
STEP 8.2 USING (5) S192144 AT NOTCH POCKET LOCATIONS, WRAP STRAP AROUND TUBE & FRAME,
FEED THRU RATCHET, AND SLIGHTLY TIGHTEN.
STEP 8.3 UNROLL PANEL OVER TOP OF FRAME.
STEP 8.4 SECURE OTHER SIDE OF PANEL USING (5) S192144 AT NOTCH POCKET LOCATIONS, BY
WRAPPING STRAP AROUND TUBE & FRAME, FEED THRU RATCHET, AND SLIGHTLY TIGHTEN.
STEP 8.5 TIGHTEN RATCHETS EQUALLY ON BOTH SIDES OF PANEL, UNTIL PANEL IS TAUT. WHEN
TIGHTENING RATCHETS MAKE SURE PANEL IS SQUARE AND CENTERED ON FRAME.
STEP 8.6 WRAP EXCESS STRAP FROM RATCHETS AROUND FRAME.
STEP 8
13