Advertisement
BILL OF MATERIAL
(2) S190007- TUBE- 2" X 16' SWAGED
(2) S197159- TUBE- 2" DIA X 96"
(4) S181886- SCREW- 1/4" X 1 1/4" DRILL
STEP 6.1 ASSEMBLE 2" TUBES AS SHOWN ABOVE AND
SECURE SWAGE CONNECTION WITH 1/4" DRILL
SCREWS (2).
STEP 6.2 WRAP SPLICE WITH DUCT TAPE.
STEP 6.3 REPEAT FOR OTHER SET OF TUBES.
BILL OF MATERIAL
(1) S196347- PANEL- 16' X 24'
(4) S181886- SCREW- 1/4 X 1/14" DRILL
POCKET
TUBE ASSY
STEP 7.1 UNFOLD PANEL ONTO GROUND. ENSURE THERE ARE NO ROUGH OR JAGGED OBJECTS
THAT MAY DAMAGE THE PANEL.
STEP 7.2 INSERT TUBE ASSEMBLIES INTO POCKETS FOUND ON ENDS OF PANEL.
STEP 7.3 INSTALL 1/4" DRILL SCREWS ON ENDS OF TUBE ASSEMBLIES.
STEP 7.4 STARTING AT ONE END OF PANEL, ROLL PANEL UP UTILIZING THE TUBE.
STEP 6
(1) S190007
STEP 7
TUBE ASSY
(1) S197159
(2) S181886
ROLL DIRECTION
12
S196347
POCKET
(1) S181886
Advertisement
