Revised ~ April 15, 2016
Controller Over/Under temperature
warning.
Drive Thermal Warning
Open Motor Fault
Left Indicator Fault
Right Indicator Fault.
Hazard Lights Fault.
Running Lights Fault
Speed Limit Warning.
Low battery
Locked Mode. *
Chair under attendant control. *
Battery charging; Inhibit. *
* These icons indicate a problem only if they appear when they shouldn't.
1. If too hot, wait for controller to cool.
2. If too cold, drive chair in limited
current mode until controller warms up.
1. Wait for motor to cool.
1. Check wiring.
2. Replace motor.
3. Replace powerbase.
1. Press Left Indicator button.
2. Replace Bulb.
3. If fault continues, check wiring.
1. Press Right Indicator button
2. Replace bulb.
3. If fault continues, check wiring.
1. Press Right or Left Indicator button.
2. Replace bulb.
3. If fault continues, check wiring.
1. Press Running Lights button.
2. Replace bulb.
3. If fault continues, check wiring.
1. Return seat to normal or upright position.
2. If fault continues, check all limit
switches and wiring.
1. Recharge battery.
1. Unlock the system.
1. Turn off attendant control (1742)
1. Unplug charger when charging is complete.
14