Advertisement
§
Y35HD configuration menus (when using the ICD, Finger Mouse, or IR Remote control
interfaces) are accessed from:
Main Menu
o
§
When connecting wirelessly through the Android compatible G4 Connect™ app.,
configuration menus are accessed from:
Preferences
o
Enter the following login information when prompted:
§
User ID:
o
Password: admin
o
§
After setting the configurations, with the HDD inserted access the setup menu.
Navigate to Setup>Maintenance>Storage to format the HDD.
§
Start vehicle, and wait for recorder to boot up (approximately two minutes). Confirm
live camera video is visible on monitor (small Green camera in each camera image –
indicates the DVR is recording).
§
Confirm DVR is recording by observing the LED's as per the following table
To access the HDD, turn the key to the unlocked position, flip the HDD handle down,
§
wait for the LEDs to turn off and pull the HDD caddy out.
LED
PWR (Power)
USB (If USB Drive
Connected)
ALM (Alarm)
REC (Recording)
ERR (Hardware Error)
NET (If a network is
connected)
CABLING DIAGRAM
è
Setup / Config
è
Config
admin
Record Mode
Color
Flashing
Status
Blue
Constant On
Blue
On
Red
Off
Green
Constant On
Red
Off
Green
Constant On
Y35HD QUICK INSTALL GUIDE
Safe to SD Card Mode
LED
PWR (Power)
USB (If USB
Drive
Connected)
ALM (Alarm)
REC (Recording)
ERR (Hardware
Error)
NET (If a
network is
connected)
- Page 2 -
Color
Flashing
Status
Blue
Off
Blue
Off
Red
Off
Green
Off
Red
Off
Green
Off
Advertisement
