Table of Contents
Advertisement
1. Press the Center button to select Declination, while this choice is highlighted.
2.
The compass reading can be modified to allow for different declination values
depending upon the vehicle's location. This is done by locating the vehicle's
current position using the following website:
https://www.ngdc.noaa.gov/geomag-web/#declination
3. Type in the zip code to get latitude and longitude, then hit the calculate button
for the current declination value.
declination screen.
4. To increase the declination value keep pressing the Right button. To decrease
the declination value keep pressing the Left button.
selected, press the Center button.
5. The system will either verify that the calibration is complete or that it failed.
Upon completion, the Left button will return to the main Compass menu. If the
display reads "Declination Failed No Response" the system received no data
from the Compass Module.
cause. To return to the main Compass screen, press the Left button.
Page 44 of 45
This value can then be selected in the
Once the value is
The vehicle should be serviced to determine the
072-101929
Advertisement
Table of Contents
