Table of Contents
Advertisement
2. Instructions for calibration will then appear on the display.
Brake and drive the vehicle two complete 360° turns (direction does not
matter).
Once the second turn is completed, hold the Center button. The
unit will then read the status from the Compass Module.
seconds.
3. The system will either verify that the calibration is complete or that it failed.
Upon completion, the Left button will return to the main Compass menu. If the
display reads "Calibration Failed No Response" the system received no data
from the Compass Module.
cause. To return to the main Compass screen, press the Left button.
Page 42 of 45
This may take a few
The vehicle should be serviced to determine the
Release the Park
072-101929
Advertisement
Table of Contents
