Table of Contents
Advertisement
Pressing any button while on a data screen will enable movement from that data
1.
screen and activate icons that indicate what each button press will do. After 5
seconds without further button press, movement from that data screen will be
disabled and the movement icons will go away.
Data can be displayed in various formats. Press the right button while movement
2.
is enabled to scroll through the current Data screen options. The last one selected
will remain as the primary Data screen.
The Data screens can be added, removed and edited in the Data Setup menu,
3.
which is described in detail in the Setup Menu instructions.
Pressing the left button while movement is enabled will display the Main Menu.
4.
While viewing either of the trip menus, Trip 1 and Trip 2, holding the Center button
5.
will cause the trip to be reset.
To reset the Instantaneous Fuel, "Fuel Inst", hold the Center button while viewing
6.
the Instantaneous Fuel screen. This can take a few moments as the command to
reset is transmitted to the engine ECU.
Page 13 of 45
072-101929
Advertisement
Table of Contents
