Table of Contents
Advertisement
Assembly (continued)
6
Inserting the drawers into the cabinet
□
Align the rear end of the metal drawer glider preassembled on both of the drawer side panels with the slot at the front end of metal drawer
glider, and insert the drawers into the unit.
NOTE: The 90 degree leg is the back leg; the angled leg is always in
the front.
Care and Cleaning
□
For best results, clean the furniture with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may
accumulate.
□
Do not clean with abrasive materials, bleach, or solvents.
Store the furniture in a dry, sheltered place when not in use.
□
□
Keep the furniture out of fire, extreme heat, freezing conditions, and inclement weather, such as rain, hail, sleet, snow, or wind.
8
Advertisement
Table of Contents
