Table of Contents
Advertisement
FAQ
FREQUENTLY ASKED QUESTIONS
Q1:
Does the AiMesh router support Access Point mode?
A: Yes. You can choose to set the AiMesh router as router mode or access
point mode. Please go to web GUI (http://router.asus.com), and go to the page
Administration > Operation Mode.
Q2:
Could I setup wired connection between AiMesh routers (Ethernet backhaul)?
A: Yes. AiMesh system supports both wireless and wired connection between
AiMesh router and node to maximize throughput and stability. AiMesh analyzes the
wireless signal strength for each frequency band available, and then determines
automatically whether a wireless or wired connection is best to serve as the inter-
router connection backbone.
Follow the setup steps to establish a connection between the AiMesh router
1
and node via WiFi first.
Place the node in the ideal locations for best coverage. Run an Ethernet cable
2
from the LAN port of the AiMesh router to the WAN port of AiMesh node.
AiMesh system will auto-select the best path for data transmission, whether
3
wired or wireless.
APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.indb 7
APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.indb 7
Modem
LAN-WAN
7
2021/10/26 11:50:26
2021/10/26 11:50:26
Advertisement
Table of Contents
