Figure 5. Sealing Strip And Cable Entry Block - Nokia MetroSite Field Upgrade Manual

2.
3.
Note
All connecting cables must be removed in order to replace the cooling fan outer
sealing gasket.
4.
5.
6.
7.
Sealing strip
A
Allen screws
M6
Allen key 4 mm
Figure 5.
26 (50) © Nokia Corporation
Nokia Proprietary and Confidential
All manuals and user guides at all-guides.com
Disengage and remove the cable cover support plate.
Remove all connecting cables to the units.
Detach the outer sealing gasket at the point where it covers the cable entry
block, see (A) in Figure 5.
Remove the two 4 mm (0.157 in) Allen screws on the cable entry block.
See (B) in Figure 5.
Open the cable entry block at the point where the cables are routed. See
Figure 8.
Disengage the cables from the cable entry block.
Sealing strip and cable entry block
Draft
Field Upgrade
DN00187365
Issue 2-0 en