Config Sync - Devolo dLAN 1200+ WiFi ac Manual

Searching for and updating firmware
automatically
The adapter can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The dLAN 1200+ WiFi ac lets you know
when a new firmware version becomes
available. The option is enabled by default.
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The dLAN 1200+ WiFi ac automatically up-
dates its firmware. The option is enabled by
default.
Download updated firmware
1
If you have downloaded an updated firm-
ware file for the dLAN 1200+ WiFi ac to your
computer, navigate to the System

ware Update firmware area. Click Browse
... and select the downloaded file.
2
Confirm the update procedure with Update
firmware. After a successful update, the
dLAN 1200+ WiFi ac restarts automatically.
Ensure that the update procedure is not inter-
rupted.

4.7.5 Config Sync

Config Sync allows settings to be configured uni-
formly for all devolo dLAN devices in the network.
This includes the following settings e.g.:
b
Wi-Fi network
b
Guest network
b
Mesh WiFi
b
Time control and time server settings.
In order to switch Config Sync on, activate the
Enable option.
Please note that the Wi-Fi is always switched
on or off for the entire network. Therefore,
stop Config Sync first on a device that you
want to configure or switch separately.

Firm-
Network configuration 44
devolo dLAN 1200+ WiFi ac