Network Jacks; Reset; Wi-Fi Antennas; Integrated Electrical Socket - Devolo dLAN 1200+ WiFi ac Manual

19 Introduction
WiFi LED
4 White
LED
* Information about the web interface can be
found in Chapter 4 Network configuration.

2.4.3Network jacks

You can use the network jacks on the dLAN adap-
ter to connect it to stationary devices such as com-
puters, game consoles, etc. using a standard
network cable.

2.4.4Reset

The reset button (next to the network jack) has
two different functions:
b
The device restarts if you press the Reset but-
ton for less than 10 seconds.
b
To
dLAN 1200+ WiFi ac back to the factory
defaults, press the Reset button for more than
10 seconds. Keep in mind that all settings that
have already been configured will be lost!
devolo dLAN 1200+ WiFi ac
Flashing behaviour
Flashes at intervals of
0.2 sec. (on/off)
change the configuration
Meaning
Firmware update
You can use a pointed object (such as a pa-
per clip) to press the Reset button.

2.4.5 Wi-Fi antennas

The internal Wi-Fi antennas are for connecting to
other network devices wirelessly.

2.4.6 Integrated electrical socket

To connect other network devices to your mains
supply, use
dLAN 1200+ WiFi ac. The mains filter integrated
into the dLAN 1200+ WiFi ac eliminates any noise
of connected devices and significantly improves
data transmission in the network.
of the
LED status display
(web interface*)
Cannot be disabled
the electrical socket of the