Remote Control Unit Rc-18Sr; Function And Operation - Marantz AV9000 User Manual

REMOTE CONTROL UNIT RC-18SR

n The remote control unit provided with the AV9000 is a
"learning"-type, programmable unit capable of controlling
almost any component in your system, as well as the
Marantz D-BUS components (RC-5). The components to be
controlled can be selected with 11 function buttons.
OPERATION
The provided remote control unit (RC-18SR) is a system remote
controller. The POWER button v, 10-key numeric buttons ⁄2 and
control buttons ⁄5 are used in common across different input source
components.
The input source system controlled with the RC-18SR changes when
one of the input selector buttons . is pressed.
nExample: To select the LD player as the input source and
play an LD on it
Press the LD button twice within 2 seconds.
The input function of the AV9000 is switched to LD
and the
RC-18SR
Press the PLAY
LOW
1
is set for control of the LD player.
button ⁄ 5 to play an LD.
LEARN
USE NAME
2 3 4

FUNCTION AND OPERATION

ON
L E A R N I N G
MACRO
1
2
LOW
D1
D2
D3
D4
1
DSS /
TV
VCR2
CD
TUNER
CH
1 2
4 5
7 8
M 0
z
MODE (operating mode)
This button is used to change from normal operation to the learning
mode, and is used when "learning" commands from other brands of
A/V components. Each time this button is pressed (using a small
pointed instrument, such as the tip of a paper clip) the mode changes
as follows: LEARN → USE → NAME. As the mode changes, the LCD
display will show which mode is currently selected.
x
MACRO (for multiple step macro functions)
This button is used to memorize a series of functions. When this
button is pressed, the RC-18SR changes to macro programming
mode, and is ready to learn a sequence of remote control commands.
17
POWER
SOURCE
OFF
ON/OFF
CLONE MACRO MODE
REMOTE CONTROL
MACRO
R C - 1 8 S R
3
4
LEARN
NAME
USE
D5
D6
D7
D8
2 3 4
LD DVD VCR
CD-R
AUX
TAPE
/ MD
VOL
3
OK
6
9
AMP GUIDE MUTE
C