Model Description - Hatco Rapide Cuisine IRNGCD Series Installation And Operating Manual

English
All Models
Hatco P Type Dual Induction Ranges are equipped with two
induction coils underneath a single ceramic glass cooking
surface, enabling the use of two pans on a single unit. Each
model features a glass touch control panel. The control panel
has separate, identical controls for each coil including a
Function Button, a Timer Button, a Control Knob, and a Control
Display. All P Type Induction Ranges include an attached
71" (1800 mm) power cord with plug.
NOTE: Refer to "Pan Specifications" in the OPERATION section
of this manual for details on "induction-ready" pans,
pans not suitable for induction cooking, and pan sizes.
Hatco P Type Dual Induction Ranges have several safeguards
built into each unit that ensure protection to the unit as well as
the operators.
• A cross-flow fan ventilation system ensures that the
electronic circuits in the unit do no overheat. Temperature
probes monitor the electronic circuits and will signal the
unit to shut down if the circuits get too hot.
• Temperature probes in the cooking zones monitor the
zone temperature. These probes detect overheating in the
cooking zone due to an empty pan.
• Electronic circuitry in the cooking zones detect when a
small, ferrous object (such as a fork, spoon, or ring) is
placed on the unit, and the unit will not operate.
Optimal Power Control
Optimal Power Control (OPC) is a power boost feature available
on some units that enables limited periods of maximum power
draw from 20 or 30 amp circuits (operation at continuous
maximum power is possible only for one hour out of a three
hour period). During these limited periods, double induction
ranges can operate at up to 2400 watts or 3600 watts on each
cooking element. This power boost helps with operations such
as searing cold proteins or boiling large pots of water. When not
operating at the highest power setting, the unit automatically
engages a power management mode to reduce power. OPC
averages the input current load over a three hour period to
ensure operation within National Electrical Code requirements.
Countertop Models
Countertop P Type Dual Induction Ranges models are portable,
countertop induction ranges.
IRNG-PC2S-xx Models
IRNG-PC2S-xx models are side-by-side dual induction ranges. The
induction coils are designated as the left coil and the right coil. The
control panel for each coil is directly in front of its corresponding coil.
Left Coil
Timer
Button
Function Button
Side-by-Side Dual Countertop Model
IRNGCDM-0522
Ceramic Glass
Cooking Surface
Right Coil
Power/Control Knob
Control Display

MODEL DESCRIPTION

IRNG-PC2F-xx Models
IRNG-PC2S-xx models are front-to-back dual induction ranges.
The induction coils are designated as the front coil and the back
coil. The control panel for each coil is designated by a graphic
on the control label—the top control panel controls the front
coil, and the bottom control panel controls the back coil.
Back Coil
Front Coil
Timer
Button
Function
Button
Front-to-Back Dual Countertop Model
Built-In Models
Built-In P Type Dual Induction Ranges are designed to be
installed into a variety of solid material countertops. The unit
includes a remote control panel that connects to the induction
range with detachable control cables that combine for a total
length of 55" (1397 mm).
Back Coil
Front Coil
Control
Cables
P Type Dual Built-In Model
NOTE: For the latest firmware updates, cooking tips, and
more, go to the Hatco Induction Range website:
www.hatcocorp.com/rapide_cuisine
5
Ceramic Glass
Cooking Surface
Power/Control
Knob
Control Display
Ceramic Glass
Cooking Surface
Remote
Control
Panel
Timer
Button
Power/Control
Knob
Function
Button
Control Display