Flexible Induction Cooking Area - Electrolux EIV65344 User Manual

Mode
H3
Mode
H4
Mode
H5
Mode
H6
1) The hob detects the boiling process and
activates fan speed in accordance with au‐
tomatic mode.
2) The hob detects the frying process and
activates fan speed in accordance with au‐
tomatic mode.
3) This mode activates the fan and the light
and does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
comes on and goes off.
3. Touch
4. Touch
on.
5. Touch
automatic mode.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.

6. FLEXIBLE INDUCTION COOKING AREA

WARNING!
Refer to Safety chapters.
6.1 FlexiBridge function
The flexible induction cooking area
consists of four sections. The sections
can be combined into two cooking zones
with different size, or into one large
cooking area. You choose the
combination of the sections by choosing
the mode applicable to the size of the
Auto‐ Boil‐
matic
1)
ing
light
On Off
On Fan
speed 1
On Fan
speed 1
On Fan
speed 2
for 3 seconds. The display
for 3 seconds.
a few times until
of the Timer to select an
2)
Frying
Fan
speed 1
Fan
speed 1
Fan
speed 2
Operating the fan speed manually
You can also operate the function
Fan
manually. To do that touch
speed 3
hob is active. This deactivates automatic
operation of the function and allows you
to change the fan speed manually. When
you press
one. When you reach an intensive level
and press
to 0 which deactivates the hood fan. To
start the fan again with fan speed 1 touch
.
Activating the light
comes
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so set the automatic mode to
H1 – H6.
cookware you want to use. There are
three modes: Standard (activated
automatically when you activate the
hob), Big Bridge and Max Bridge.
Switching between the modes
To switch between the modes use
sensor field:
When you finish cooking and
deactivate the hob, the hood
fan may still operate for a
certain period of time. After
that time the system
deactivates the fan
automatically and prevents
you from accidental
activation of the fan for the
next 30 seconds.
you raise the fan speed by
again you will set fan speed
To activate automatic
operation of the function,
deactivate the hob and
activate it again.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
To set the heat setting use
two left side control bars.
.
ENGLISH 13
when the