Remote Control Unit Rc5000I - Marantz SR-14EX User Manual

REMOTE CONTROL UNIT RC5000i

This chapter describes the functions which control the SR-14EX.
Please look at the user guide of the RC5000i for operation
instructions.
z MUTE button
This button can be used to mute the sound temporarily.
x CHANNEL UP (+) AND DOWN (-)
These buttons are used to raise and lower the TV or VCR channel.
c VOLUME UP (+) AND DOWN (-)
These buttons are used to raise and lower the main system or TV
volume level.
v CONTRAST (+, –) dial
This dial is used to adjust the contrast of Touchscreen.
b BACKLIGHTING button
This button is used to activate the back-lit LCD screen and back-lit keys.
n TOUCHSCREEN
Touchscreen is used to activate the various functions and operations.
The followings describe the PreAmp mode for SR-14EX.
General
Home button
This button is used to return to initial display.
Page scroll buttons
These buttons are used to select any pages of this devise.
INPUTS
FUNCTION buttons
(DVD, LD, VCR, AUX,DSS,TV, Tuner, CD, TAPE, CD-R/MD, )
These buttons are used for selecting an input function.
M.R.(Multi Room) ON, and OFF buttons
This button is used to switch the unit to multi room mode.
SURROUND
Surround mode buttons
( , dts, THX, THX Sur EX, Movie, 5 Stereo, Stereo, S-Direct,
Hall, Mono,Auto,Matix)
These buttons are used to select the SURROUND mode.
CONTROL
Power on / off buttons
These buttons are used to turn on or off SR-14EX
Night button
This button is used to set night mode. This feature reduces the
input level of dolby digital sources by 1/3 to 1/4 at their loudest
thresholds, preventing the dynamic range or loud sounds without
restricting the dynamic range or volume of other sounds or at less
than maximum levels.
Sleep button
This button is used to set the sleep timer.
OSD button
This button is used to turn on the On Screen Display for general
information.
6CH IN button
This button is used to play the surround processor which is
connected to the DIRECT IN JACKS.
A/D button
This button is used to switch between the analog input and the
digital input.
Display button
This button is used to turn off the display.
ATT button
This button is used to attenuate for analog input
Mute On and Off buttons
This button can be used to mute the sound temporarily.
SETUP
ok, and cursor (^ / v / < / > )buttons
These buttons are used to navigate within on-screen menus.
(Refer to"ON-SCREEN MENU SYSTEM" on page 15-19)
Menu On and Off buttons
These buttons are used to turn on and off the on screen menu system.
CH. Sel button
Press this button to adjust the volume levels of the front, center,
surround, subwoofer
channels. Each press of the button changes the channel which can
be adjusted.
CH.Level (^ :up / v : down) buttons
Increases or decreases channel level volume
After pressing the CH+ button, use the ^ :up or v : down buttons to
adjust the volume level of
each speaker channel.
12