• Place the product on a flat surface and prevent table shaking or vibration.
• Make sure all the parts are well assembled before plugging in.
• Do not put less than 200g (1 flour cup) or more than 400g (2 flour cups) of flour in the
chamber.
• Pour in the liquid slowly through the water slot after the appliance starts kneading.
• If you want to dispose of the weighed flour before processing with the next batch, empty
the chamber and restart the appliance by unplugging and plugging in again.
• Do not put any ingredients that are 60°C / 140°F or above into the Pasta and noodle maker,
or place the Pasta and noodle maker in surroundings at high temperature (60°C / 140°F),
for instance in a high temperature sterilization environment. This will deform the appliance.
• Do not pour liquid into the mixing chamber before the Pasta and noodle maker starts
running.
• Make sure the shaping disc and shaping disc holder are assembled properly before
plugging in the appliance.
Using the Pasta
and noodle maker
Important
English
17