Sm-Ma-F180P/P2, Sm-Ma-F203P/Pm, Sm-Ma-F220P/Pl, Sm-Ma-F220P/Pl2, Sm-Ma90- F180P/P, Sm-Ma90-F203P/Pm - Shimano SM-MA-F180P/P2 Dealer's Manual

Installation/removal
Post mount type
SM-MA-F180P/P2, SM-MA-F203P/PM, SM-MA-F220P/PL, SM-
MA-F220P/PL2, SM-MA90-F180P/P, SM-MA90-F203P/PM
1.
Set the mount adapter onto the brake caliper, then install it to the
frame.
Check the dealer's manual for the brake caliper to install for information on the tool used
for the caliper fixing screws.
NOTICE
• Secure the caliper fixing screw, then retain it. Refer to the dealer's manual of the
brake caliper and retain it by installing a snap ring or by winding wire around it.
Mount adapter
Wire
Mark
Caliper fixing screw (long)
6 - 8 N·m
6 - 8 N·m
Caliper fixing screw (short)
Snap ring
7