Sm-Ma-F140P/D, Sm-Ma-F160P/D - Shimano SM-MA-F180P/P2 Dealer's Manual

Installation/removal
Flat mount type

SM-MA-F140P/D, SM-MA-F160P/D

1.
Install the mount adapter to the frame.
2.
Secure the mount adapter fixing screws.
Secure the screws with a wire to prevent the screws from coming loose.
3.
Depress the brake lever so that the disc brake rotor is held between
the pads, then tighten the caliper fixing screws.
Check the dealer's manual for the brake caliper to install for information on the tool used
for the caliper fixing screws. If the brake hose is not already installed in the caliper, install
the brake hose then perform the step.
6 - 8 N·m
Mount adapter fixing screw
Wire
6 - 8 N·m
Caliper fixing screw
15