Options And Accessories - PANHANS 116 10 Operating Manual

16

Options and Accessories

In the following tables you will find available options and accessories to upgrade your machine. You can find
general spare parts in our online shop on  https://www.hokubema.com.
Use only the tools, accessories and spare parts specified by the manufacturer. The use of other
tools, accessories or spare parts may cause injury to persons and damage to the machine. The
manufacturer accepts no liability for any damage resulting from the use of tools, accessories
or spare parts not specified by the manufacturer or from additional components supplied by
third parties!
Article
VARIABLE DOUBLE MITRE FENCE
2 PIECES PNEUMATIC
SAFETY CLAMPING CYLINDERS
SINGLE-LEVER OPERATION
DIAL GAUGE IN HANDWHEEL
LASER WITH POWER SUPPLY
LASER WITH BATTERY POWER
SPECIAL EMERGENCY STOP BUTTON
SAFETY PROTECTION COVER
SONDERSPANNUNG
COLLET CHUCK
WITH ONE COLLET
EXTRA COLLET
VARIABLE SPEED CONTROL
VIA FREQUENCY INVERTER
You can find more spare parts in the online shop on  https://www.hokubema.com.
BA_PH_116-10_EN_12-22.docx
Description
Infinitely variable angular adjustment range from 22.5° to
75° instead of the pluggable mitre fence for fixed degrees of
45° and 22.5°.
100 mm stroke, with manual slide valve; for clamping the
workpieces on the table top of the machine (instead of the
manual eccentric clamps). Compressed air connection re-
quired from the customer!
With remote locking for the longitudinal and transverse
movement of the drill motor, including release and locking
of the locking bolt on the dowel drilling unit (instead of the
2-lever operation), narrow workpieces can thus also be ma-
chined from the table side.
With 0.1 mm display of height adjustment instead of scale.
For drill line visualisation,
Laser beam with 300 mm line length.
For drill line visualisation,
Laser beam with 300 mm line length.
Lockable, key included.
Safety protection cover with electrical locking, for mounting
above the drill chuck
220 V / 50 HZ, maximal 4 kW.
Instead of the three-jaw drill chuck (diameter = 10 mm);
Other collets on request.
Ø 2 - 20 mm, please specify diameter (price per piece).
Variable speed control of the drill spindle via frequency in-
verter (adjustable from approx. 100 to 2870 rpm).
Art. No.
4459
4612
4058
4306
4579
4236
4610
4611
4600
4928
4929
4609
41