Page 3
PARTS LIST & FITTINGS ITEM PART DESCRIPTION DIMENSION (inch) IMAGE QTY. Outside Roof Panel 113 x 79 Kimmeridge Front Frame Assembly 4 x 39 Kimmeridge Rear Frame Assembly 3 x 38 Kimmeridge Straight Tie Bar Assembly Central Tie Bar Tie Bar 1 Center Post Assembly Top Center Curve Lower Centre Curve...
Page 4
If you have received the "Split End" version (If not go straight to Step 1) Join the three frame sections to make the Complete Side Frame using the M10x 4 bolts. Note: Shelter has 2 sides Left and Right. Make sure all holes are in correct position before assembling.
Page 5
Step 2 Loosely fasten TCC Top Centre Curve to CTB Central Tie Bar, after doing this place CP Central Post under TB1 Tie Bar 1 and bolt through all 3 parts. Step 3 Put the LCC Lower Centre Curve in place do not tighten the bolts to far as the second side will be attached here.
Page 6
Step 4 Repeat Step 1, 2 and 3 with the opposite side of the shelter this time securing all centre bolts tightly making one complete unit. Step 5 Offer each panel to the shelter as shown below and secure in place using Tec-Screws.
Page 7
Step 6 Finally move shelter to desired position and instert KEF Kimmeridge External Foot into each leg. (Note: the slot in the foot is to allow adjustment on an uneven surface) Secure in Place using the Anchor Bolts supplied.
Touch up any exposed metal should it get scratched CONTACT DETAILS: Email : Sales@nobutts.com Web : www.nobutts.com Tel : 1-888-662-8887 No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443 All Parts and Fixings checked by: Print Name: Signature:...