Note For Repair - Sony MHS-TS22 Service Manual

NOTE FOR REPAIR

• Make sure that the flat cable and flexible board are not cracked or
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, do not pull at wire of connector. It is
possible that a wire is snapped.
• When installing a connector, do not press down at wire of connector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
MHS-TS22
Cut and remove the part of gilt Cut and remove the part of gilt
which comes off at the point. which comes off at the point.
(Be careful or some (Be careful or some
pieces of gilt may be left inside) pieces of gilt may be left inside)
2-2