Table of Contents
Advertisement
Quick Links
EVPLUG CHARGERS, S.L.
Address : EVPLUG CHARGERS, S.L.
Street Calle Punto Net 4, 2º Centro Tecnológico Alcalá
28805 (Madrid)
Phone : +34 911467425
Email : info@evplugchargers.com
VERSION : 20211128
For the latest version of this manual, please refer to www.evplugchargers.com or contact to
info@evplugchargers.com. We reserve the right to update the terms of specification.
BCP Series
AC EV Charger
Use and lnstallation Manual
WWW.EVPLUGCHARGERS.COM
Advertisement
Table of Contents
Related Manuals for evplug BCP Series
Summary of Contents for evplug BCP Series
- Page 1 BCP Series AC EV Charger Use and lnstallation Manual EVPLUG CHARGERS, S.L. Address : EVPLUG CHARGERS, S.L. Street Calle Punto Net 4, 2º Centro Tecnológico Alcalá 28805 (Madrid) Phone : +34 911467425 Email : info@evplugchargers.com VERSION : 20211128 For the latest version of this manual, please refer to www.evplugchargers.com or contact to WWW.EVPLUGCHARGERS.COM...
-
Page 2: Table Of Contents
CONTENTS Safety information Important safety instructions P-01 ● ● Cautions P-02 Notes P-02 ● Specification P-03 ● Features P-03 ● Prepare for installation Minimum installation requirements P-05 ● Position P-06 ● Height P-06 ● Maximize wifi signal reception(for models with wifi function) P-06 ●... -
Page 3: Safety Information
This device should be supervised when used around children. Do not use private power generators as a power source for charging. The BCP series EV Charger must be grounded through a permanent wiring system or an equipment grounding conductor. Incorrect installation and testing of the EV Charger could potentially damage either the vehicle's Battery and/or the EV Charger itself. -
Page 4: Specification
Safety information Safety information Specification ● charger stop working when an anomaly is detected, the charger will periodically self- check whether the anomaly is eliminated. The charger will start to work automatically after ensure the anomaly has been eliminated. Description Specification Voltage and Wiring Single-phase EV Charger: AC230V±10%;... -
Page 5: Prepare For Installation
Prepare for installation Prepare for installation Position Ensure that the parking position is within range of the charging cable. ● There is enough clearance for the charging cable to wrap around and the charging ● handle can be comfortably positioned on the side of base. If installed in an enclosed garage, choose to install on the side of the EV charger slot. -
Page 6: Power Supply
APP to turn off the earth detection and it will work, but it will reduce to the leakage protection safety level. This BCP series AC EV charger must be grounded via a permanent electrical system or equipment grounding Conductor. - Page 7 In the box Installation instructions Step-by-step installation instructions ① ② ③ ④ ⑤ (bottom entry wiring) Step 1 ⑥ ⑦ ⑧ ⑨ ⑩ Position ⑨ wall The bottom of the positioning plate is 1.2 m away (recommended), if the EV Drill charger is installed close to the edge of The 6 pionts...
-
Page 8: Installation Instructions
Installation instructions Installation instructions Step-by-step installation instructions Step-by-step installation instructions (bottom entry wiring) (top entry wiring) Step 3 Step 1 lnstall the EV Charger to the mounting Position plate ⑨ wall The bottom of the positioning plate is 1.2 m away (recommended), if M6*8 bolts Drill Align the side hole of EV charger to... -
Page 9: Step-By-Step Installation Instructions (Top Entry Wiring
Installation instructions Installation instructions Step-by-step installation instructions Step-by-step installation instructions (top entry wiring) (rear entry wiring) Step 3 Step 1 Cut out on the back of the EV charger. Position ⑨ wall The bottom of the positioning plate M6*8 bolts Find the hole for cut out on the back is 1.2 m away (recommended), if the Drill... -
Page 10: Set The Operating Current
Installation instructions Installation instructions Step-by-step installation instructions Warning (rear entry wiring) ● Do not connect the power cord before reading and fully understanding all the concepts introduced in this section. If you are not sure whether the type of power Step 3 supply on the repair panel is available, please consult an electrician for assistance. -
Page 11: Operating Status
Operating status Operating status Power on checking EV Charger LED light Emergency Stop Protection Yellow Light ON Check content Yellow & Red LED flicker CP signal abnormal Check and ensure the circuit breaker for the EV charger is reasonably selected alternately (interval 1s) Confirm that there is no short circuit between the Poor grounding/Nature and live wire... -
Page 12: Buzzer Prompt Description
Operating status Maintenance instructions Buzzer prompt description ln order to ensure the normal service life of the charging pile and reduce the risk during use, it must be overhauled with in the specified time period; the overhaul of the equipment should be carried out by professionals, band qualified and safe overhaul tools should be Buzzer Status... -
Page 13: Safety Notice
Maintenance instructions Pen fault protect function Safety notice Protection against electric shock following the loss of the PEN conductor in a TN-C-S earthed electrical system. Operation and maintenance risk notification ● Do not disassemble or modify charging facilities and wiring without authorization, otherwise it may cause fire and electric shock accidents.
Need help?
Do you have a question about the BCP Series and is the answer not in the manual?
Questions and answers