One Touch Call; Torch/Flashlight - Gigaset W570 Manual

Gigaset W570 / LUG MEA-ZA en / A31008-M2708-M231-1-3Z19 / applications_LUG.fm / 10/1/19

One touch call

You can set up your phone so that you can dial a specific number when you press any key on the
keyboard. This allows children, who are unable to enter a number, to call a certain number, for
example.
¤
Menu
If you activate the one touch call, the menu automatically opens up afterwards in order to enter
the destination number.
¤
Call Target: Enter or change the number that you wish to dial.
The activated One Touch Call appears on the idle display. The saved number is dialled by
pressing any key. Press the End call key
Ending one touch call mode
¤
Press display key Off
or: Press and hold the
If you have already assigned the emergency function to the key
number is also selected if a one touch call is initiated.

Torch/Flashlight

You can use your telephone as a torch.
Activating/deactivating the torch function
Switch on:
Switch off:
The function is automatically deactivated if the emergency function is pressed.
If the torch is activated, all functions are locked, however the emergency function still
works.
The torch LED can also be used as an optical call signal for incoming calls (
de en fr nl
One Touch Clock OK
Press and hold the
key
¤
Menu Flashlight
¤
Off (After 2 minutes the function is automatically deactivated. )
Activation OK (
OK
to cancel dialling.
key.
OK . . . the torch is activated.
One touch call
= activated)
, the emergency
p. 37).
31