Using The Handset As An Alarm Clock - Gigaset W570 Manual

Gigaset W570 / LUG MEA-ZA en / A31008-M2708-M231-1-3Z19 / applications_LUG.fm / 10/1/19
•
•
•
•
•

Using the handset as an alarm clock

Activating/deactivating the alarm clock
The time is set
¤
Menu
After you activate the alarm clock, the menu for setting the wakeup time opens automatically.
Setting the wakeup time
¤
Menu
OK Enter wakeup time
If the alarm clock is activated, you will see the
display and the wakeup time after it.
The wakeup time is shown in the display only when all
calls in the call lists have been read.
Setting the alarm clock signal
¤
Menu
Switching off/repeating the alarm after an interval (snooze mode)
Prerequisite: An alarm call sounds.
¤
Deactivate until the next alarm call: Press Off.
Or:
¤
Snooze mode:
Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated after
5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.
de en fr nl
When using Eco Mode+ you can ensure that the range of the base is sufficient by
long pressing the talk key
When Eco Mode+ is enabled:
•
Call setup is delayed by approx. 2 seconds.
•
The standby time is reduced by about 50%.
Registering handsets that do not support Eco Mode+ causes the mode to be deac-
tivated on the base and all other handsets.
Activating Eco Mode reduces the range of the base.
Eco Mode / Eco Mode+ and repeater support (
you use a repeater you cannot use Eco Mode or Eco Mode+.
p. 10).
(
Alarm Clock OK
Alarm Clock OK
OK
Alarm Clock OK
Using the handset as an alarm clock
. You hear the dial tone if the base can be reached.
p. 39) cancel each other out i.e., if
Activation OK ( = on)
Wake-up Time
icon in the
Signal OK (
07:15
10:50
Menu
= on)
29