Install Ssds; Put The Stabilization Plat Back - H3 Falcon 5208 Installation Manual

Install SSDs

1. Plug the SSD to the PCIe slot.
2. Screw the bracket.
The PCIe slots are designed for single width device.
Oversized device may not fit.
Please screw the bracket. The PCIe gold finger
of the SSD could be damaged due to chassis.
vibration.

Put the stabilization plat back

1. Place the stabilization plate back.
2. Put the screws back on both sides.
There are screw holes on both sides of the plate, screw all of them.
There are three positions available to put the plates on (as indicated in the right image).
Pick the position that you are comfortable with.
5