Booting Process; Connect The Management Port To Your Network; Connect Falcon 5208 To Your Host Machine(S) - H3 Falcon 5208 Installation Manual

Booting Process

Please complete Falcon 5208 boot up before powering on any connected host machine.
Improper operation may cause system errors.
It is recommended to install all devices before booting up Falcon 5208.

Connect the management port to your network

Make sure Falcon 5208 and your management device are under the same network domain.
You can connect Falcon 5208 to your network switch or to your management device directly.

Connect Falcon 5208 to your host machine(s)

(Continue to next page)
10