Linksys WPC100 User Manual page 20

Chapter 3
Enter Key Manually
Proceed to the appropriate section, "Wireless Security
Disabled" or "Wireless Security Enabled".
Wireless Security Disabled
If you connect to a network whose wireless security is
disabled, then you will view this screen:
Click Connect Anyway
Connect Anyway.
1. Click
2. Click Finish.
Congratulations
Congratulations! The Adapter is connected to
the network.
RangePlus Wireless Notebook Adapter
Advanced Configuration
Wireless Security Enabled
If you connect to a network whose wireless security is
enabled, then you will view one of three screens.
1. Proceed to the appropriate instructions.
WPA2 (Wi-Fi Protected Access 2)
If the network uses WPA2 Personal security, then
the WPA2-Personal Key Needed for Connection screen
appears.
WPA2-Personal Security
Passphrase Enter the network's Passphrase (also
called a pre-shared key) of 8-63 characters.
To connect to the network, click Connect. To cancel
the connection, click Cancel.
WPA (Wi-Fi Protected Access)
If the network uses WPA Personal security, then the
WPA-Personal Key Needed for Connection screen.
WPA-Personal Security
Passphrase
Enter the network's Passphrase (also
called a pre-shared key) of 8-63 characters.
To connect to the network, click Connect. To cancel
the connection, click Cancel.
17