CDI TRAXALL 620: TRAXALL 501: TRAXALL 500: User Manual page 13

GETTING STARTED
Insert six AA-cell alkaline ba eries (also included). Observe ba ery
polarity as shown on receptacle. Check seal for deforma on, cracks,
tears, or foreign objects. Replace cover. gn objects. Replace cover. n objects. Replace cover.
Tighten screws carefully and evenly to maintain s carefully and evenly to maintain
a weatherproof seal. DO NOT OVERTIGHTEN. of f seal. DO NOT OVERTIGHTEN.
Startup
Hold down the Power bu on about 3–5 seconds.
The LED array will momentarily light up. A steady green ba ery light
indicates ready (full charge) state.
READY
LOW
REPLACE
TRAXALL 620/501/500 USER GUIDE
Page 13 of 32
STARTUP