Olitech EasyMate 2 User Manual page 15

the phone (back cover removed), the
lanyard eyelet is located on the top left
corner of the phone. We recommend
removing the material from the lanyard (via
the black side squeeze buckle) prior to
securing it to the phone to simplify the
threading process.
Step 1: Thread the black lanyard cord
Insert the looped end of the thin black
lanyard cord into the top of the lanyard
eyelet (above the horizontal bar). Insert the
pointy end of the silver tool into the bottom
of the lanyard eyelet (space under the
horizontal bar) and use it to pull the lanyard
cord out under the horizontal bar.
Continue pulling the looped end of the
lanyard cord under the horizontal bar until
the black side squeeze buckle touches the
phone.
Step 2: Secure black lanyard cord
Thread the black side squeeze buckle
through the looped black cord and pull side
squeeze buckle to tighten.
Step 3: Insert battery
If the battery is not already inserted, do so
now.
15