Olitech EasyMate 2 User Manual page 12

SIM card (8.8 X 12.3 mm) must be inserted
into the EasyMate 2. The SIM slot is
located in the top left corner of the battery
recess. The nano SIM card should be
oriented with the gold chip facing down and
the cut out on the top left corner.
To insert the nano SIM card,
slide it under the silver
bracket. The silver bracket on
the SIM slot does not move.
The SIM card should be inserted
from the bottom of the SIM slot
and slid towards the top until it
just reaches the top of the SIM
slot.
To remove the SIM card, use the rounded
end of the silver tool to slide the SIM
downwards in the slot until the top of the
SIM reaches the top of the silver bracket.
You can then use the pad of your thumb/
finger to apply gentle pressure and gently
continue sliding the SIM downwards. Do
not try to lift/lever the silver bracket.
Please obtain assistance from another
individual, consult Olitech's instructional
videos https://www.olitech.com.au/pages/
12