Product Outline; Specifications; Unpacking And Installation - Sharp AR-SP2 Service Manual

[1] PRODUCT OUTLINE

This unit is installed to the top of the copier to feed document auto-
matically. Documents are automatically transported to the copier to
allow continuous copying.

[2] SPECIFICATIONS

Document set Face up
direction
Document set Center reference
position
Document transport Sheet through type
system
Document feed Top takeup
sequence
AB series: A3 ∼ A5
Document size
Inch series: 11 × 17 ∼ 8.5 × 5.5
56 ∼ 90g/m
Document weight
Document set 30 sheets (30 sheets, 90 g/m
quantity Max. thickness 4mm
583mm (W) × 435mm (D) × 131mm (H)
Dimensions
Weight About 5.3 Kg
Power source Supplied from the copier.
Document size Document feed tray upper
detection
Detection size Japan: A3, B4, A4, A4R, B5, B5R
Inch series: 11 × 17, 8.5 × 14, 8.5 × 11, 8.5 × 11R,
8.5 × 5.5
EX AB series: A3, B4, A4, A4R, A5
Multi copy Models without memory:
S → S unavailable
Models with memory copy:
S → S allowed
With the electronic sort board:
S → S allowed
Document mixture Mixture paper feed:
Copy mode: Unavailable
FAX mode: Allowed (Same width)
Random paper feed Unavailable
Document reverse None
Display section None
(LED)
S → S: 16 sheets/min
Document
replacement speed (Document replacement rate 100%)
2
2
)
S → D unavailable
(Duplex copy model only)
S → D unavailable
(Duplex copy model only)
S → D allowed
(Duplex copy model only)
[3] UNPACKING AND
INSTALLATION
1. Unpacking
2. Installation
(1) Package contents
Name
Screw
SPF glass holding cover
SPF harness
Ring core
Installation manual
∗
Be careful not to use the removed screws in different locations.
1) Remove the document cover.
Lift the document cover and remove it from the copier.
– 1 –
Quantity
2
1
1
1
1