First Start; Initialising The Instrument - Nexus NX Compass Installation And Operation Manual

NX Compass Pack English

5 First start

5.1

Initialising the instrument

You will be asked to press SET (PrESkey) on the instruments the
very first time after installation. This will give the instrument a
logical ID number that belongs to your specific Nexus Network.
Press SET, on each installed instrument, one at the time.
Always wait for the text 'Init OK' to be displayed,
before you press SET on the next instrument!
The first unit ID number is 16, then 17 and so on in the order which
you press SET.
The example shows that the NX Compass
instrument has version no. 1.00 and ID
number 17
13