III. PCBs
A.
Lifter Motor Driver PCB
1) Remove the rear cover and the left
cover.
2) Remove the seven connectors, two
screws, two hooks, four nuts and the
lifter motor driver PCB.
[1]
[3]
[1] Connector
[2] Screw
[3] Hook
[4] Nut
[5] Lifter motor driver PCB
Figure 3-301
COPYRIGHT © 1999 CANON INC.
[2]
[4]
[1]
[5]
CANON 2 × 500 SHEET PAPER DECK-C1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
B.
Paper Feed PCB
1) Remove the paper unit according to
the instructions in the procedure for
removing the paper feed unit (on
page 3-4).
2) Remove the screw, two hooks, three
connectors and the paper feed PCB.
[1]
[3]
[1] Screw
[2] Hook
[3] Connector
[4] Paper feed PCB
Figure 3-302
[4]
[2]
[3]
3-13