Table of Contents
Advertisement
Maintenance
INSPECT/ CLEAN HEAT SINK FINS
INSPECT HEAT SINK FINS
Using a flash light (or other light source), shine a light through the heat sink fins. If the fins are unobstructed, you should
be able to see the exhaust fan. If the fan is not visible or partial obstruction exists, clean the heat sink fins.
CLEAN HEAT SINK FINS
Using a soft bristled brush, gently remove to debris from the heat sink. Alternatively, a computer safe aerosol cleaner
can be used to remove the debris. Clean any loose debris from the enclosure and blower motor using a vacuum or
compressed air.
REPLACING PELTIER ELEMENT
Contact Factory for Peltier replacement options. It is recommended on the 1095E Freezer Chiller elements be replaced at
the factory. In rare occurrences a procedure to replace the elements may be obtained.
Page 14 of 25
MAN.1095E.REVB.12232014
Advertisement
Table of Contents
